Skip to content
newprotein.net Explore ingredients
Menu
An open field notebook with pressed plant specimens and handwritten squiggle lines beside a magnifying glass

Alternative protein glossary: 156 terms explained

The vocabulary of protein quality, processing, functionality, fermentation, cultivated meat and regulation, defined for the people who formulate and source alternative proteins.

3

3D printing

Additive manufacturing of food by depositing protein-based pastes or gels layer by layer according to a digital design.

More on 3D printing

For alternative proteins, 3D printing allows marbled whole-cut analogues with controlled placement of fat and protein phases. Paste rheology, print speed and post-processing determine quality. Throughput remains low, so applications are mostly premium or specialised. Printing is also used to prototype structures quickly before translating promising designs to extrusion or moulding at industrial scale.

See also: Texturisation, Rheology

A

Adherent culture

Cell growth attached to a surface, such as flasks, microcarriers or scaffolds, typical of muscle and fibroblast cells.

More on Adherent culture

Adherent cells need surface area, so scale-up uses microcarriers or large planar systems. Harvest requires detachment, which adds steps. Surface-dependent growth sets reactor design and limits achievable volumetric density. Muscle satellite cells and fibroblasts are typical examples, and their dependence on attachment influences process development.

See also: Suspension culture, Microcarriers, Scaffold

Air classification

A dry separation step that splits finely milled flour into fine and coarse fractions according to particle size and density.

More on Air classification

In pulses, the fine fraction is enriched in protein while the coarse fraction carries most of the starch. Mill settings, classifier speed and moisture influence cut points and yields. The process is a central unit operation of dry fractionation for pulse protein concentrates.

See also: Dry fractionation, Milling

Airlift bioreactor

A bioreactor in which gas injection drives circulation without mechanical agitators, giving lower shear and simple construction.

More on Airlift bioreactor

Airlift reactors are used for fungal biomass and gas fermentation, and are discussed for cultivated cells due to gentle mixing. Their oxygen and mass transfer behaviour must be characterised carefully when scaling to industrial volumes. Without moving parts, cleaning is simpler, and maintenance requirements are lower than for large stirred tanks used at the same volume.

See also: Bioreactor, Gas fermentation

Allergen labelling

Legal requirement to declare certain allergenic ingredients on food packs, with lists varying by jurisdiction.

More on Allergen labelling

The EU lists 14 allergen groups, including soybeans, peanuts, nuts, lupin, celery, mustard, sesame and gluten cereals. Novel proteins can cross-react with listed allergens, so assessments and label statements need to consider crustacean and house dust mite cross-reactivity for insects.

See also: Precautionary allergen labelling, Cross-reactivity, Lupin protein

Allocation

The method for dividing environmental burdens between a main product and co-products in an LCA.

More on Allocation

Mass, economic or system-expansion allocation can produce different outcomes. For protein from oilseeds or insect farming with fat and frass, allocation choices strongly shape the reported footprint per kilogram of protein. Standards recommend avoiding allocation where possible and testing alternative methods to show how sensitive the result is.

See also: Life cycle assessment, System boundary

Anti-nutritional factors

Naturally occurring compounds in plant materials that reduce nutrient digestibility or absorption, such as trypsin inhibitors, phytate and tannins.

More on Anti-nutritional factors

Legumes, oilseeds and cereals contain different sets of these compounds, and their level affects digestibility and flavour. Heat treatment, fermentation, soaking and breeding reduce many of them. Supplier specifications often report trypsin inhibitor activity or phytic acid as quality indicators.

See also: Trypsin inhibitor, Phytic acid, True ileal digestibility

B

Batch traceability

The ability to follow an ingredient lot from raw material through processing to customer shipment.

More on Batch traceability

Traceability supports recalls and quality investigations, and is required by food law. Suppliers assign lot codes linked to raw material origin, production records and CoA data. Mock recall exercises test the system, and good records allow a supplier to identify affected customers within hours.

See also: CoA, Specification sheet

Beany flavour

An off-flavour of green, grassy or bean-like notes often found in legume proteins, caused by volatile compounds from lipid oxidation.

More on Beany flavour

Hexanal and related aldehydes formed by lipoxygenase are key contributors. Mitigation includes enzyme-inactivating heat treatment, lipoxygenase-free varieties, fermentation and flavour masking or binding. It remains a main barrier to plant protein acceptance in neutral products. Sensory panels and headspace analysis are used together to confirm progress when reducing these notes in new protein ingredients.

See also: Lipoxygenase, Off-flavours, Hexanal

Beta-lactoglobulin

The main whey protein in cow's milk, often produced by precision fermentation as an animal-free whey protein ingredient.

More on Beta-lactoglobulin

Beta-lactoglobulin is highly soluble and gels well, and is high in leucine. Recombinant versions are produced in microbial hosts. Because it is a milk allergen, products carrying it must still declare milk for allergic consumers. Heat stability and clarity in acidic drinks make it of interest for sports beverages, where plant proteins often struggle.

See also: Precision fermentation, Whey, Precision-fermented whey protein

Biological value

A measure of the fraction of absorbed dietary nitrogen that is retained by the body for maintenance and growth.

More on Biological value

Biological value was developed in nitrogen balance studies and is expressed relative to egg protein in many tables. It accounts for utilisation but not digestibility, so it is rarely used alone today. It appears mainly in historical literature and in some sports nutrition marketing.

See also: Protein efficiency ratio, DIAAS

Biomass fermentation

Cultivation of microorganisms, such as fungi, yeast or bacteria, in large volume so the cells themselves are harvested as food protein.

More on Biomass fermentation

The microbe is the product, and protein is typically 40 to 70 percent of dry cell mass depending on organism. Examples include mycoprotein, yeast protein and bacterial single-cell protein. Feedstock, nucleic acid content and cell wall digestibility influence application. Production uses relatively little land and runs continuously in some cases, but needs a sugar or gas feedstock and energy input.

See also: Precision fermentation, Traditional fermentation, Mycoprotein

Bioreactor

A vessel in which biological material is grown under controlled conditions of temperature, pH, oxygen and mixing.

More on Bioreactor

Designs include stirred tank, airlift, bubble column and loop reactors, each with different mixing and oxygen-transfer characteristics. Reactor selection influences scale-up, energy use and shear exposure, which matters especially for fragile animal cells. Instrumentation such as sensors for dissolved oxygen, pH and temperature supports control and records for regulatory documentation.

See also: Airlift bioreactor, Submerged fermentation, Perfusion

Bitterness

A taste sensation associated with certain peptides, saponins, phenolics and some amino acids in protein ingredients.

More on Bitterness

Bitterness can limit use of hydrolysates, rapeseed and pea fractions at higher dosing. Strategies include debittering enzymes, selective extraction, masking compounds and blending. Sensory tests are needed because instrument data do not fully predict perception. Bitter taste receptors respond to a broad set of molecules, so bitterness often arises from several compounds acting together at once.

See also: Off-flavours, Protein hydrolysate, Saponins

Black soldier fly

A fly species whose larvae convert organic waste into protein and fat, widely farmed for feed and increasingly for food.

More on Black soldier fly

Larvae grow quickly on diverse substrates, and legal rules on permitted feed substrates differ for food and feed uses. The species is mostly used in animal feed in Europe, while human food applications are developing under novel food rules. Adult flies need a separate breeding area, and larvae are separated from frass by sieving before they are processed further.

See also: BSF, Larvae, Frass

BSF

Abbreviation for black soldier fly, Hermetia illucens, the main insect species used for farmed larvae protein and fat.

More on BSF

See black soldier fly. Ingredient specifications may refer to BSF meal, BSF oil and frass as separate co-products, each with its own regulatory and quality parameters. The abbreviation is common in industry literature, so product developers meet it in supplier data and in trade association documents.

See also: Black soldier fly, Larvae

Bulk density

The mass of powder per unit volume as packed, affecting storage, packaging and dosing.

More on Bulk density

Low bulk density protein powders occupy more space in packaging and logistics and can create dusting. Density is influenced by drying method and agglomeration and is usually included in specification sheets. Tapped density and flowability are measured together, since dense, free-flowing powders are easier to handle on automated dosing lines.

See also: Particle size distribution, Spray drying

C

Casein

The main milk protein group, forming micelles that give milk its white appearance and enabling cheese curd formation.

More on Casein

Alpha, beta and kappa caseins assemble with calcium phosphate into micelles. Recombinant caseins are explored for cheese analogues that stretch and melt, though assembly into functional micelles depends on phosphorylation and calcium handling. Because casein is poorly soluble at acidic pH, formulation of beverages with casein-type proteins differs from that of whey-type proteins.

See also: Casein micelle, Rennet, Casein

Casein micelle

A colloidal particle of casein proteins and calcium phosphate that stabilises milk and aggregates on coagulation.

More on Casein micelle

Micelle structure explains heat stability and gelation of milk, and is the target for animal-free cheese. Recreating it from recombinant caseins requires correct ratios, phosphorylation and minerals, and is a major technical challenge. Researchers study how kappa-casein and mineral content determine micelle size and the behaviour of the resulting curd.

See also: Casein, Rennet, Precision-fermented casein

CDMO

Contract development and manufacturing organisation, a company that develops processes and produces ingredients on behalf of clients.

More on CDMO

For precision fermentation and cultivated startups, CDMOs provide capacity without building plants. Selection criteria include scale, food-grade certification, intellectual property handling and technology transfer experience. Early engagement matters, because capacity is limited and food-grade fermentation slots can be booked far in advance.

See also: Tolling, Scale-up, Pilot plant

Cell bank

A stored, characterised stock of frozen cells that provides consistent starting material for production runs.

More on Cell bank

Master and working banks are tested for identity, sterility and genetic stability. A well-managed bank supports reproducibility across batches and is a core part of the documentation submitted to food safety authorities. Banks are stored in liquid nitrogen vapour, and records of each vial support traceability throughout the product lifetime.

See also: Cell line, Passage number

Cell culture medium

The liquid containing nutrients, salts, amino acids, vitamins and signalling factors that supports cell growth outside the animal.

More on Cell culture medium

Medium typically makes up the largest share of cultivated meat operating cost. Developers work to cut expense through food-grade components, recycling spent medium and removing growth factor dependence. Basal media were developed for biomedical research, and their food-grade adaptation involves ingredient substitution and supply chain checks.

See also: Serum-free media, Growth factors, Perfusion

Cell density

The number of cells or the mass of cells per unit volume of culture, a key driver of productivity and cost.

More on Cell density

Cultivated meat targets densities far above typical biopharma levels to approach tissue-like concentrations. Higher density raises output per reactor volume but intensifies oxygen, nutrient and waste management challenges. Reported densities should be stated per volume of culture and specify whether wet or dry cell mass is meant.

See also: Perfusion, Bioreactor

Cell disruption

Breaking open microbial or algal cells to release intracellular protein, typically by high-pressure homogenisation or bead milling.

More on Cell disruption

Tough cell walls limit protein availability in yeast, microalgae and fungi. Disruption raises digestibility and enables extraction of protein concentrates, but increases energy demand and may release compounds affecting taste or colour. The degree of disruption can be monitored by microscopy or by measuring released protein, and it is optimised for each organism.

See also: Downstream processing, Yeast protein, Chlorella

Cell line

A population of cells that can be propagated in culture over many divisions, serving as the starting material for cultivated meat.

More on Cell line

Lines may come from muscle, fat or fibroblast cells of cattle, poultry, fish or other species. Growth rate, genetic stability and ability to differentiate decide suitability. Developers document origin and banking, which regulators ask about in safety dossiers. Authentication, for example by genetic testing, confirms species identity and rules out cross-contamination that could compromise a dossier.

See also: Immortalisation, Cell bank, Cultivated meat

Chitin

A structural polysaccharide in insect cuticle and fungal cell walls, indigestible to humans in large part and affecting protein measurement.

More on Chitin

Chitin contributes to nitrogen but not to digestible protein, so crude protein figures overstate value unless corrected. Defatting and fractionation can reduce chitin, and it is also a source of valuable chitosan. Estimates of chitin content vary by method, so quality assessment typically involves a defined analysis and clear reporting of what was measured.

See also: Protein content (Nx factor), Larvae, Cricket protein

Chromatography

A separation method in which components of a mixture are resolved by differential interaction with a solid phase.

More on Chromatography

Ion exchange and other forms are used to purify specific proteins from fermentation broths. They give high purity but add cost and scale limits, so food-grade processes often replace them with filtration and precipitation where specification allows. Column capacity, resin lifetime and buffer consumption determine whether chromatographic steps are affordable at food ingredient prices.

See also: Downstream processing, Ultrafiltration

Clean label

A positioning of foods with short ingredient lists of familiar items, without additives perceived as artificial.

More on Clean label

Clean-label goals shape protein choice, since isolates, hydrolysates and enzymes can be viewed negatively. Formulators weigh functionality against label length. Definitions are not regulated, so claims need care and consistent internal criteria. Because consumer perception differs by country, teams define internal criteria and review them against market research and regulations.

See also: Methylcellulose, Protein isolate

CoA

Certificate of analysis, a document reporting test results for a specific batch against agreed specification limits.

More on CoA

A CoA states protein, moisture, ash, microbiology and other parameters measured for a batch. Buyers compare it with the specification sheet and may verify with independent laboratory tests, especially for new suppliers. The certificate lists the analytical method for each parameter, and an accredited laboratory stamp adds confidence to the data.

See also: Specification sheet, Batch traceability

Continuous fermentation

A fermentation mode in which fresh medium is fed and culture is withdrawn at the same rate, maintaining a steady state.

More on Continuous fermentation

Continuous operation can raise productivity and reduce downtime, and is used commercially for some mycoprotein production. Contamination risk and strain stability over long runs are the main concerns, so run durations and sterility design are key. It requires stable control of dilution rate and is often paired with heat treatment of the harvested biomass to reduce RNA content.

See also: Fed-batch, Bioreactor, Mycoprotein

Cooling die

A temperature-controlled die at the end of an extruder that cools the protein melt gradually to lock in aligned fibrous structure.

More on Cooling die

Die geometry, length, gap and coolant temperature influence fibre orientation and moisture retention. Without adequate cooling the extrudate expands and loses fibre definition. Die design is therefore a major lever in high-moisture extrusion. Operators monitor die pressure and temperature closely, since small changes alter fibre formation and the final texture of the product.

See also: High-moisture extrusion, Texturisation

Cross-contact

The unintentional transfer of an allergen to another food through shared equipment, surfaces or handling.

More on Cross-contact

In facilities running soy, pea, wheat and nut ingredients, cross-contact controls such as scheduling, cleaning validation and dedicated lines are central. Suppliers report allergen status and control measures in questionnaires. Allergen testing by ELISA or PCR verifies cleaning, and results are documented as part of the allergen management plan.

See also: Precautionary allergen labelling, Allergen labelling

Cross-reactivity

Immune recognition of similar proteins from different sources, so people allergic to one may react to another.

More on Cross-reactivity

Insect proteins can cross-react with shrimp and dust mite tropomyosin, and legumes can cross-react with peanut. Novel protein dossiers therefore include allergenicity assessments, and labels may need advisory statements. Clinical relevance varies among individuals, so assessments combine sequence similarity, in vitro tests and available clinical information.

See also: Allergen labelling, Tropomyosin, Cricket protein

D

Defatting

Removal of fat from a raw material, for example insect biomass or oilseed meal, to raise protein concentration.

More on Defatting

Mechanical pressing or solvent extraction removes oil, leaving a protein-rich meal and a separate fat fraction. Defatting also improves shelf life by reducing oxidation, and the oil can be a co-product with its own market. The remaining fat content is reported on the specification sheet, along with the fatty acid profile of the separated oil.

See also: Insect farming, Mealworm protein

Degree of hydrolysis

The percentage of peptide bonds cleaved in a protein hydrolysate, indicating how far the protein has been broken down.

More on Degree of hydrolysis

A low degree of hydrolysis tends to improve emulsifying and foaming properties, whereas higher values increase solubility and bitterness and reduce gelling ability. Reporting the measurement method matters, because OPA, TNBS and pH-stat methods can give different numbers for the same material.

See also: Protein hydrolysate, Foaming capacity

Denaturation

A structural change in which a protein loses its native folded form without breaking peptide bonds, often irreversibly.

More on Denaturation

Heat, pH extremes, shear and solvents can denature proteins, reducing solubility but also enabling gelation and improving digestibility by unfolding. Processing choices such as spray drying inlet temperature determine the extent in ingredient powders. Differential scanning calorimetry measures denaturation temperature, which differs between sources and helps predict where gelation begins during heating.

See also: Gelation, Solubility, Spray drying

DIAAS

Digestible Indispensable Amino Acid Score, a protein quality metric based on true ileal digestibility of each indispensable amino acid.

More on DIAAS

FAO proposed DIAAS in 2013 to replace PDCAAS. Scores are reported against age-specific reference patterns, with bands of 75 to 99 for a good source and 100 or above for an excellent source. For formulators it shows which amino acid limits a protein and how blending can lift the overall score.

See also: PDCAAS, Limiting amino acid, True ileal digestibility

Diafiltration

A membrane step in which water is added during filtration to wash out small solutes from a retained protein solution.

More on Diafiltration

Diafiltration lowers salt, sugar, phytate and flavour-active compounds while keeping the protein in the retentate. It is a common polishing step for isolates and for precision fermentation products, trading extra water use and membrane area for higher purity. The number of wash volumes used determines how much of the small molecules are removed, which is a trade-off with processing time.

See also: Ultrafiltration, Downstream processing

Differentiation

The process by which precursor cells mature into specialised cells such as muscle fibres or fat cells.

More on Differentiation

In cultivated meat, differentiation is triggered by changes in medium and conditions and shapes texture and taste. Control of the proportions of muscle, fat and connective tissue is central to designing recognisable meat products. Differentiated cells often stop dividing, so timing of the switch balances biomass accumulation against tissue quality in the final product.

See also: Cell line, Scaffold, Cultivated fat

Distributor

An intermediary that buys ingredients from manufacturers and resells them in smaller lots with local logistics and technical support.

More on Distributor

Distributors can hold stock, lowering MOQs and lead time. They add margin and sometimes limit access to technical data, so product developers may still request direct contact with the producer for specifications. Distributors also manage import documentation and can help ensure the product is authorised for sale in the buyer's market.

See also: MOQ, Tolling

Downstream processing

All steps after fermentation that recover, purify and finish the product, such as cell separation, filtration, chromatography and drying.

More on Downstream processing

For precision fermentation, downstream steps often account for a large share of production cost and set final purity and host residual levels. Process design must also address removal of host cell proteins and DNA to meet food safety expectations. Every extra step reduces yield, so process developers try to merge or remove steps while still meeting the agreed product specification.

See also: Ultrafiltration, Chromatography, Precision fermentation

Dry basis

A way of expressing composition relative to dry matter, excluding moisture, so that ingredients can be compared fairly.

More on Dry basis

Protein percentages quoted as as-is and dry-basis differ by the moisture content, typically a few percent in powders. Mixing the two leads to errors in comparisons and formulation. Specification sheets should state the basis explicitly. Converting between the two requires only the moisture value, but the conversion must be applied consistently when comparing competing quotations.

See also: Specification sheet, Protein content (Nx factor)

Dry fractionation

Mechanical separation of milled seeds into protein-rich and starch-rich fractions without water, usually combining milling with air classification.

More on Dry fractionation

Dry fractionation keeps native protein functionality and avoids wastewater and drying energy, but it yields concentrates of roughly half the protein of isolates. It works best on starch-rich pulses such as peas and faba beans, where protein and starch granules separate by size and density.

See also: Air classification, Protein concentrate, Fava bean protein

E

EFSA

The European Food Safety Authority, which assesses the safety of novel foods and gives scientific opinions to EU risk managers.

More on EFSA

EFSA does not authorise products itself. Its opinion informs the Commission and member states, who decide in a committee procedure. Guidance documents set out data needs on composition, production, toxicology and allergenicity. Its panel on nutrition, novel foods and food allergens produces opinions, and applicants can have clock-stop requests while data are supplied.

See also: Novel food, QPS

Electrospinning

A fibre-forming method using an electric field to draw a polymer or protein solution into very fine fibres.

More on Electrospinning

In alternative protein work, electrospinning is explored for producing scaffolds for cultivated meat and for nano-structured fibres. It is currently limited to laboratory and pilot scale, and food-grade solvent systems are a key constraint. Fibre diameter, voltage and solution viscosity are tuned to produce mats that cells can colonise during tissue formation.

See also: Scaffold, Wet spinning

Emulsifying capacity

The amount of oil that a given quantity of protein can emulsify before the emulsion breaks.

More on Emulsifying capacity

Proteins adsorb at oil-water interfaces and reduce interfacial tension. Capacity and emulsion stability depend on solubility, pH and processing, and test conditions vary, so supplier numbers are best used for relative ranking within a single method. Applications include plant-based mayonnaise, dressings and meat analogue batters, where droplet stability during heating and storage is decisive.

See also: Foaming capacity, Oil binding, Solubility

F

Fat marbling

Visible streaks or flecks of fat built into plant-based meat to copy the look and bite of marbled meat.

More on Fat marbling

Formulators use fat flakes, emulsion gels or oleogels that keep their shape during mixing and forming. Pure fats tend to melt out under high heat and leave voids, so some suppliers combine coconut oil with insoluble fibre to keep the marbling visible after cooking, while the product carries less total fat than traditional marbled meat.

See also: High-moisture extrusion, Methylcellulose, Emulsifying capacity

FBS

Abbreviation for fetal bovine serum, an animal-derived supplement used in laboratory cell culture.

More on FBS

See fetal bovine serum. Industry has largely moved to serum-free media for food production, and in dossiers FBS use in early development must be explained, including any carry-over in the cell bank. Replacement strategies include defined supplements, plant hydrolysates and recombinant proteins produced for food use.

See also: Fetal bovine serum, Serum-free media

FDA

The United States Food and Drug Administration, responsible for food safety regulation including cultivated meat pre-market consultation.

More on FDA

For cultivated animal cells, FDA conducts a pre-market consultation and USDA-FSIS handles inspection and labelling of meat and poultry. FDA also administers the GRAS programme and allergen labelling requirements for most foods. Producers combining several ingredients should check which agency has authority, since the division differs by food type and species.

See also: GRAS, Novel food

Fed-batch

A fermentation mode in which nutrients are added during the run, with no culture removed until the end.

More on Fed-batch

Controlled feeding avoids substrate inhibition and supports high cell densities, which is why it is common in precision fermentation. Feed strategy affects yield and by-product formation, and each batch ends with harvest and cleaning before the next cycle. Because yield per cycle and cycle time determine output, fed-batch design is closely linked to cost per kilogram of product.

See also: Continuous fermentation, Bioreactor, Submerged fermentation

Fetal bovine serum

A serum from bovine fetal blood used traditionally to supply growth factors in cell culture, abbreviated FBS.

More on Fetal bovine serum

FBS raises ethical, supply and batch variability concerns, and conflicts with the animal-free promise of cultivated products. Most companies now use serum-free media and regulators treat any residual serum use as a point to document. Serum composition varies by lot, which complicates comparison of results between laboratories and can affect cell growth rates.

See also: Serum-free media, Growth factors

Flavour precursors

Compounds such as amino acids, sugars and fats that react during heating to generate characteristic aromas.

More on Flavour precursors

Meat analogues often include yeast extracts, sugars, cysteine and fats to drive reaction flavours on cooking. Heme proteins serve a similar role, catalysing flavour formation as well as contributing colour. Formulators tune precursor ratios and cooking conditions so that the analogue develops a savoury aroma without relying on artificial flavours.

See also: Maillard reaction, Heme protein

Foaming capacity

The volume of foam produced when a protein solution is whipped or sparged under defined conditions.

More on Foaming capacity

Foaming capacity and foam stability are separate properties. Both matter for aerated products and egg-white replacers. Proteins such as potato patatin and chickpea aquafaba components perform well, while hydrolysates often foam more but with less stability. Foam stability is influenced by pH, salts, sugar and the presence of fat, which can destabilise foams in complex formulations.

See also: Emulsifying capacity, Egg white protein, Potato protein

Frass

The excreta of insect larvae, mixed with residual feed, used as an organic fertiliser and a side stream of insect farming.

More on Frass

Frass production is proportional to substrate consumption and is a valuable by-product in circular farming models. Its composition, hygiene status and registration as fertiliser vary by region and affect farm economics. Sellers report nutrient content and moisture, and some regions require heat treatment or hygienisation before it can be sold as fertiliser.

See also: Larvae, Insect farming

Freeze drying

Removal of water from a frozen product by sublimation under vacuum, preserving structure and heat-sensitive components.

More on Freeze drying

Freeze drying retains native protein properties and flavour but costs far more energy and time than spray drying. It is used for sensitive ingredients such as some cultured cells, enzymes and high-value fractions, and in laboratory sample preparation. Because of its cost, it rarely features in commodity protein production and is reserved for high-value or research materials.

See also: Spray drying, Denaturation

FSANZ

Food Standards Australia New Zealand, the body that develops food standards and assesses novel foods for both countries.

More on FSANZ

Applications to amend the Food Standards Code are assessed by FSANZ and approved by food ministers. It has assessed applications for precision fermentation proteins and cultivated products, with public consultation steps. A decision includes the approved specification and conditions of use, which are recorded in the Code once ministers have agreed.

See also: Novel food, SFA

Functional unit

The reference quantity in an LCA to which all inputs and impacts are scaled, such as one kilogram of protein.

More on Functional unit

Choosing mass of product, mass of protein or nutritional equivalent changes the ranking of foods. Protein-based units suit protein ingredient comparisons but may ignore digestibility, which DIAAS-corrected units attempt to address. Stating the unit clearly is the first check when reading any comparative environmental claim about protein ingredients.

See also: Life cycle assessment, DIAAS

G

Gas fermentation

A process in which microbes use gases such as hydrogen, carbon dioxide or methane as carbon and energy sources to make protein.

More on Gas fermentation

Hydrogen-oxidising and methanotrophic bacteria are cultured on gas mixtures to produce single-cell protein. Gas transfer, safety around flammable mixtures and the energy source determine economics and carbon footprint. The process uses gas as carbon and energy source, so the carbon footprint depends on how hydrogen and carbon dioxide are generated.

See also: Airlift bioreactor, Hydrogen-oxidising bacteria protein

Gelation

The formation of a three-dimensional protein network that traps water, typically triggered by heat, acid, salts or enzymes.

More on Gelation

Gel strength and onset temperature vary widely between sources, so gelling behaviour often decides whether a protein suits sausages, egg replacers or dairy-style desserts. Least gelling concentration and storage modulus are common measures. Gels may form on heating, on acidification or with added salts, and the resulting texture can range from soft and elastic to firm.

See also: Denaturation, Water holding capacity, Transglutaminase

GRAS

Generally Recognized as Safe, a United States status for substances considered safe by qualified experts under intended conditions of use.

More on GRAS

GRAS can be reached through FDA notification, with a no-questions letter, or by independent determination. Many precision fermentation proteins entered the US market under GRAS. Ingredients still need compliance with labelling and allergen requirements. The status is specific to an intended use and specification, so a change in production strain or application may need a new assessment.

See also: Self-GRAS, FDA, GRAS notice

GRAS notice

A voluntary submission to FDA presenting the basis for a GRAS conclusion, to which the agency replies in a letter.

More on GRAS notice

FDA's response may state that it has no questions, that it cannot conclude, or that the notifier withdrew. The letters and notices are publicly available, which lets buyers verify the exact intended use and specifications covered. Notice numbers are listed in an FDA inventory, giving buyers a simple way to confirm the status claimed by a supplier.

See also: GRAS, FDA

Growth factors

Signalling proteins added to culture medium to stimulate cell proliferation and differentiation, such as FGF2 and insulin.

More on Growth factors

These proteins are among the most expensive components of culture medium. Reducing their cost through recombinant production in microbes, lower dosing or engineered cells is a central cost-reduction topic for cultivated meat. Their stability at culture temperature also matters, since degradation forces repeated additions and increases the effective cost per batch.

See also: Serum-free media, Precision fermentation, Cell culture medium

H

Heavy metals

Toxic elements such as lead, cadmium, arsenic and mercury that can accumulate in some alternative protein raw materials.

More on Heavy metals

Seaweed, microalgae and some insects or rice can accumulate arsenic or cadmium from the environment. EU maximum levels apply to certain foods, and suppliers provide analyses on each batch or periodically. Limits are set in food law for many foods, and food supplements and ingredients intended for them may have specific rules.

See also: Microbiological specification, Rice protein, Seaweed protein

Heme protein

An iron-containing protein such as myoglobin or leghemoglobin that contributes colour and meaty flavour to analogues.

More on Heme protein

Heme proteins change from red to brown on cooking and catalyse flavour reactions, mimicking meat behaviour. Plant-derived leghemoglobin is produced by precision fermentation, and regulatory review focuses on safety of the expressed protein and its host. Because heme iron also drives lipid oxidation, formulation must manage shelf life and storage conditions for products that contain it.

See also: Flavour precursors, Precision fermentation, Leghemoglobin (heme protein)

Heterotrophic culture

Growth of algae on organic carbon such as glucose in the dark, in fermenters rather than light-driven reactors.

More on Heterotrophic culture

Heterotrophic chlorella and euglena reach higher cell densities than phototrophic culture and give controlled quality and neutral colour. They use sugar feedstock, so cost and sustainability depend on the carbon source. Products made this way may have a different composition from light-grown biomass, including lower pigment content and different lipid levels.

See also: Photobioreactor, Submerged fermentation, Chlorella

Hexanal

A six-carbon aldehyde formed from linoleic acid oxidation, widely used as a marker for grassy and beany off-flavour.

More on Hexanal

Hexanal levels measured by headspace gas chromatography are used to benchmark flavour quality of pea, soy and other legume ingredients. Low odour thresholds mean small amounts can be perceptible, and storage oxidation can raise it over time. It is generally used together with sensory evaluation, as other compounds also contribute and individual perception thresholds vary considerably.

See also: Lipoxygenase, Beany flavour

High-moisture extrusion

Cooking extrusion of protein with high water content, typically above 50 percent, through a cooling die to form fibrous, meat-like structures.

More on High-moisture extrusion

The cooling die aligns protein phases as the melt solidifies, producing layered fibres in a process called texturisation. Screw configuration, temperature profile and moisture drive fibre formation. Products are usually chilled or frozen and are used in chicken-style and whole-cut analogues.

See also: Low-moisture extrusion, Texturisation, Cooling die

History of safe use

Evidence that a food has been consumed over time by a significant population, used to support safety in regulatory assessment.

More on History of safe use

In the EU, it underpins the traditional food notification for products from third countries with 25 years of use. It is also relevant when arguing a new cultivar or process does not change composition or risk. Applicants provide consumption data, preparation methods and any reported adverse effects from the country where the food is eaten.

See also: Novel food, Traditional food

Host cell protein

Residual proteins from the production microorganism that remain in a precision fermentation ingredient after purification.

More on Host cell protein

Levels are measured and limited because they can carry allergenicity or safety concerns. Downstream processing and analytics, such as immunoassays or mass spectrometry, quantify them. Dossiers include these data alongside DNA residue results. Purification steps and heat treatment reduce host proteins, and analytical limits are set based on the safety assessment of the host.

See also: Downstream processing, Precision fermentation

Hybrid product

A food combining cultivated cells with plant-based ingredients, to lower cost and provide structure.

More on Hybrid product

Hybrid products use plant protein or fat as the bulk and cultivated cells for flavour and nutrition. Regulatory labelling must indicate each component, and percentages of cultivated content are defined in submissions and on pack. Hybrids also let manufacturers reach price points sooner, since the cultivated fraction is a small share of the total recipe.

See also: Cultivated meat, Labelling

I

Immortalisation

Altering cells so they divide indefinitely, for instance by activating telomerase or inactivating senescence pathways.

More on Immortalisation

Spontaneous or engineered immortalisation lets a cell line support large-scale production without constant re-isolation. Whether a genetically modified line is used influences regulatory classification, labelling and consumer perception in different markets. Approaches that rely on spontaneous adaptation, rather than genetic modification, are chosen by some developers to simplify regulatory discussions.

See also: Cell line, Novel food

Indispensable amino acids

Amino acids that humans cannot synthesise in sufficient quantity and must obtain from food, also called essential amino acids.

More on Indispensable amino acids

Nine are recognised for adults: histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan and valine. Their content and balance, rather than total protein alone, define nutritional value. Specification sheets for alternative proteins increasingly report the full amino acid profile for this reason.

See also: Limiting amino acid, DIAAS

Insect farming

The controlled rearing of insects on prepared feed substrates for use as food, feed or fertiliser.

More on Insect farming

Operations include breeding, larval growth, harvest, killing, drying and fractionation. Substrate rules, welfare considerations and microbiological safety are the key quality factors. Vertical production aims at high output per footprint. Regulatory frameworks in the European Union list authorised insect species and specify permitted substrates, processing methods and labelling.

See also: Frass, Larvae, Cricket protein

Isoelectric point

The pH at which a protein carries no net electric charge and typically shows minimum solubility.

More on Isoelectric point

For many plant globulins this lies around pH 4 to 5. Knowing the isoelectric point guides extraction, precipitation and beverage formulation, since acidic products near this pH risk protein aggregation and sedimentation. Because several proteins coexist in a seed, a mixture usually has a range of isoelectric points rather than a single sharp one.

See also: Isoelectric precipitation, Solubility

Isoelectric precipitation

Recovery of a dissolved protein by adjusting pH to its isoelectric point, where solubility is lowest and the protein aggregates.

More on Isoelectric precipitation

After alkaline extraction, acid is added to reach roughly the protein's isoelectric point, and the curd is collected by centrifugation, neutralised and dried. The approach is simple and widely used for pea, soy and canola isolates, though it loses soluble proteins that remain in the whey stream.

See also: Isoelectric point, Wet extraction, Ultrafiltration

L

Labelling

Rules governing how product names, ingredient lists and claims describe alternative protein foods to consumers.

More on Labelling

Naming rules differ widely: some jurisdictions restrict meat and dairy terms for plant-based products, and cultivated products may need specific wording. Checking national rules and ingredient declarations early prevents rework of packaging. Because rules on terms such as milk, burger and meat differ between countries, export products may need market-specific packaging.

See also: Hybrid product, Allergen labelling

Land use

The area of land needed to produce a given quantity of food, used as a sustainability indicator for protein sources.

More on Land use

Plant proteins usually need less land per gram of protein than ruminant meat, while fermentation and insects use little arable land but need feedstock or energy. Indicators should be considered alongside water and emissions. It is usually quoted per kilogram of protein or per unit of calories, and the basis should be stated for a fair comparison.

See also: Life cycle assessment, Functional unit

Larvae

The juvenile feeding stage of holometabolous insects, which is harvested for protein and fat.

More on Larvae

Black soldier fly and mealworm larvae are reared on organic substrates, then killed, dried and processed. Harvest timing influences composition, as protein and fat shares change over the larval stage. Moisture-rich larvae spoil quickly after harvest, so rapid blanching, freezing or drying is part of standard operations.

See also: Black soldier fly, Frass, Mealworm protein

LCA

Abbreviation for life cycle assessment, ISO 14040 and 14044 based accounting of environmental impacts.

More on LCA

Alternative protein LCAs are often prospective, since plants are pilot scale. Inputs for energy, feedstock and yield strongly influence results, so sensitivity analysis and transparent assumptions are needed before environmental claims are made. Impact categories typically include global warming potential, land use, water scarcity and eutrophication, and each is reported separately.

See also: Life cycle assessment, Functional unit

Lead time

The period between placing an order and receiving the ingredient, driven by production scheduling and logistics.

More on Lead time

For novel proteins made in campaigns, lead times may span several weeks to months. Planning trials and launches requires realistic lead times and agreed safety stock. Shipping routes, customs and cold chain needs add to production lead time, especially for imports from other continents.

See also: MOQ, Distributor

Lemna

A genus of duckweed, a small floating aquatic plant grown as a high-protein crop and a source of rubisco.

More on Lemna

Duckweed grows rapidly on nutrient-rich water in controlled indoor or outdoor systems. Leaf protein can be fractionated to isolate rubisco, which has strong functional properties, and regulatory pathways vary by region. The plant doubles its biomass quickly under suitable conditions, and its protein share can be relatively high compared with many crops.

See also: Rubisco, Duckweed (water lentil) protein, RuBisCO protein

Life cycle assessment

A standardised method quantifying environmental impacts of a product across stages from raw material to end of life, abbreviated LCA.

More on Life cycle assessment

LCA studies of alternative proteins report greenhouse gas emissions, land and water use. Results depend on system boundary, allocation of co-products and data sources, so comparisons are valid only for matching functional units. Third-party review adds credibility, and published guidelines such as the EU product environmental footprint method set common rules.

See also: LCA, Functional unit, System boundary

Limiting amino acid

The indispensable amino acid present in the lowest amount relative to the requirement pattern, setting the ceiling for protein quality.

More on Limiting amino acid

Lysine is commonly limiting in cereals, and methionine plus cysteine in many legumes. Identifying the limiting amino acid guides blending, such as pairing cereal and legume proteins, or supplementing with free amino acids. It also determines the amino acid score used in PDCAAS and DIAAS calculations.

See also: Indispensable amino acids, DIAAS, Rice protein

Lipoxygenase

An enzyme that oxidises polyunsaturated fatty acids and starts the formation of volatile compounds linked to green and beany flavours.

More on Lipoxygenase

It is active once seed tissue is crushed in the presence of water and oxygen. Inactivating it by heat, blanching or using null-lipoxygenase soy varieties lowers off-flavour precursors. Timing of inactivation relative to milling matters. Because the enzyme acts within seconds of cell damage, early inactivation steps in the process have the biggest effect on flavour.

See also: Beany flavour, Hexanal, Soy protein

Low-moisture extrusion

Extrusion of protein at low water content, typically below 30 percent, followed by expansion at the die to give dry textured pieces.

More on Low-moisture extrusion

The expanded, porous product is dried and sold as textured vegetable protein, which rehydrates for use in mince and chunk analogues. It is cheaper and more shelf-stable than high-moisture products but gives a less fibrous bite. Typical products include granules, flakes and chunks that are rehydrated in water or broth before further cooking by manufacturers.

See also: High-moisture extrusion, Texturisation, Textured vegetable protein

M

Maillard reaction

A non-enzymatic reaction between reducing sugars and amino groups that creates colour and roast-type flavour on heating.

More on Maillard reaction

In meat analogues the Maillard reaction supplies browning and savoury aroma during cooking, often supported by added sugars and amino acids. It also consumes lysine, lowering protein quality in strongly heated ingredients. Reaction speed depends on temperature, pH and water activity, so formulators tune these to reach target colour without bitter burnt notes.

See also: Flavour precursors, Limiting amino acid

Methylcellulose

A cellulose ether used as a binder in meat analogues, which gels on heating and softens on cooling.

More on Methylcellulose

Its thermal gelation holds patties together during cooking. Because it is a processed additive, clean-label efforts look to replace it with citrus fibre, starches or native protein gels, with varying success in bite and juiciness. Its use level in analogues is usually low, but the effect on texture is large, which makes replacement a technical challenge.

See also: Gelation, Clean label

Microalgae

Microscopic photosynthetic organisms, including cyanobacteria, grown as sources of protein, lipids and pigments.

More on Microalgae

Spirulina, chlorella and nannochloropsis differ in cell wall toughness, colour and taste. They offer high protein but are limited by flavour, colour and cost, with applications in supplements, colourants and fortified foods. Cell wall toughness limits digestibility for some species, which is why processing often includes a disruption step before use.

See also: Phycocyanin, Cell disruption, Spirulina

Microbiological specification

Limits for total viable count, yeasts, moulds, Enterobacteriaceae and pathogens such as Salmonella in an ingredient.

More on Microbiological specification

Insect and algal ingredients often need extra attention to spore-formers and Bacillus cereus. Specifications state the method and sampling plan, and buyers expect regular testing, particularly for products made in open or solid-state systems. Out-of-specification results trigger investigation and possible product hold, with documentation required by the food safety management system.

See also: Specification sheet, Pasteurisation

Microcarriers

Small beads or particles that provide surface area for adherent cells to grow in suspended bioreactors.

More on Microcarriers

Edible or dissolvable microcarriers can remain in the product or be removed at harvest. They increase surface-to-volume ratio and allow stirred-tank use with anchorage-dependent cells, though separation, cost and shear sensitivity require attention. Materials of interest include cellulose, collagen-free hydrogels and plant-derived particles, selected for compatibility with food use.

See also: Adherent culture, Bioreactor

Milling

Size reduction of seeds or press cakes to flour, with the fineness setting how well protein bodies are liberated from cell structures.

More on Milling

Pin, jet and hammer mills produce different particle size distributions and heat loads. Fine milling frees protein but can damage starch and raise heat exposure. Mill choice therefore affects both fractionation efficiency and later functionality. Moisture content of the raw seed also matters, because damp material smears and blocks screens during fine grinding.

See also: Air classification, Dry fractionation

MOQ

Minimum order quantity, the smallest amount a supplier will sell in one order of a given ingredient.

More on MOQ

Alternative protein ingredients often have high MOQs from production batch sizes, which challenges small brands. Sample sizes, pilot lots and distributor stock are common ways to bridge development and launch quantities. Negotiation can be possible for first orders, especially when suppliers expect a long-term relationship with growing volumes.

See also: Tolling, Specification sheet

Mycotoxins

Toxic compounds produced by moulds on crops, such as aflatoxins and ochratoxin A, regulated in food ingredients.

More on Mycotoxins

Raw materials such as cereals, nuts and legumes can carry mycotoxins, and fungal fermentation requires strains that do not produce them. Specifications include limits and testing programmes follow regulatory maximum levels. Control starts at raw material selection and storage, because toxins are heat-stable and are not removed by normal processing.

See also: Heavy metals, Koji protein

N

Nitrogen solubility index

A test reporting the percentage of total nitrogen in a protein sample that dissolves under standard conditions.

More on Nitrogen solubility index

NSI serves as a quick indicator of the degree of heat damage or denaturation of a protein ingredient. Methods differ in buffer and time, so values from different suppliers can only be compared when the protocol is the same. Because it is cheap and fast, it is widely used for incoming inspection and for monitoring process consistency between batches.

See also: Solubility, Denaturation

Novel food

In the EU, a food not consumed to a significant degree before 15 May 1997 that requires authorisation before marketing.

More on Novel food

Under Regulation (EU) 2015/2283, applicants submit a safety dossier to EFSA and the Commission authorises through implementing acts. Many alternative proteins, such as insects and certain algae and fermentation products, fall into this route, with timelines often measured in years.

See also: EFSA, History of safe use, Traditional food

Nucleic acid content

The share of RNA and DNA in a microbial biomass, which is high in single-cell proteins and limits safe daily intake.

More on Nucleic acid content

Metabolising nucleic acids produces uric acid, so high intakes are a concern in single-cell protein from bacteria and yeast. Heat or enzymatic treatment is often used to reduce RNA levels, and the residual content appears in specifications. Buyers using single-cell protein as a major protein source should therefore check the RNA level and recommended maximum intake.

See also: Yeast protein

O

Off-flavours

Unwanted taste or aroma notes in a food, arising from raw material, processing or storage, such as bitter, beany or astringent sensations.

More on Off-flavours

Alternative proteins can show bitter peptides, saponins, oxidised lipids or earthy notes from microbial metabolites. Sensory panels and gas chromatography combined with olfactometry help locate causes. Controlling them often combines breeding, processing and formulation. Identifying the cause is the first step, because the right remedy differs for oxidation, bitterness and microbial notes.

See also: Beany flavour, Bitterness, Saponins

Oil binding

The capacity of a protein ingredient to absorb and retain fat or oil, influencing mouthfeel and fat release.

More on Oil binding

Oil binding relates to protein surface hydrophobicity and particle structure. It affects texture in sausages, spreads and bars, and loss of oil during cooking. Reported values depend on particle size and test protocol. In meat analogues, fat binding supports juiciness and release of flavour compounds on chewing, so values inform the choice of fat system.

See also: Water holding capacity, Emulsifying capacity

Open pond

A raceway or shallow pond system for photosynthetic microalgae, using sunlight and low-cost infrastructure.

More on Open pond

Open systems suit robust or extremophile species such as spirulina and chlorella. They are cheaper but exposed to contamination, weather and seasonal variation, so food-grade production requires hygiene controls and harvesting monitoring. Paddle wheels mix the culture, and harvest involves filtration or centrifugation followed by washing and drying of the biomass.

See also: Photobioreactor, Spirulina

Ovalbumin

The main protein in egg white, produced by precision fermentation as an animal-free egg protein ingredient.

More on Ovalbumin

Ovalbumin gives gelling and foaming behaviour in bakery and confectionery. Recombinant forms aim to replace egg white in meringues and baked goods, and remain subject to egg allergen labelling because they are identical or very close to the native protein. Bakers assess results through foam volume, gel strength and bake stability, comparing the ingredient against standard egg white.

See also: Precision fermentation, Foaming capacity, Precision-fermented egg white (ovalbumin)

P

Particle size distribution

The spread of particle diameters in a powder, influencing dispersibility, mouthfeel, flow and dissolution.

More on Particle size distribution

Fine proteins disperse faster but may clump and dust, whereas coarse or agglomerated powders wet more evenly. Laser diffraction data in the specification help predict behaviour in beverages and dry blends. Particle size also affects colour and perceived grittiness, which matters in beverages and smooth textures such as spreads.

See also: Specification sheet, Solubility

Passage number

The count of times cells have been subcultured, indicating how long a population has been in culture.

More on Passage number

Primary animal cells have a finite number of divisions before they senesce, so passage number limits scale. Cultivated meat developers track it to monitor phenotype and genetic drift and to define maximum culture age. Logging passages helps teams decide when to restart cultures from the bank so that production material stays consistent.

See also: Cell line, Immortalisation

Pasteurisation

A mild heat treatment that reduces vegetative microorganisms in food without full sterilisation.

More on Pasteurisation

Heat treatment of protein ingredients balances microbial safety with protein functionality, since heat denatures protein. Spore-formers and insect or algae biomass can need validated kill steps, and processes are validated with log reduction studies. Different matrices need different time-temperature combinations, which are validated rather than assumed, particularly for dense or fibrous materials.

See also: Denaturation, Shelf life

PDCAAS

Protein Digestibility-Corrected Amino Acid Score, an older quality metric using faecal crude protein digestibility and a capped amino acid score.

More on PDCAAS

PDCAAS was the standard for protein quality claims for decades and is still referenced in some labelling rules, notably in the United States. Because it truncates scores at 1.0 and relies on faecal digestibility, it can overstate quality for some plant proteins, which is why DIAAS is preferred in research.

See also: DIAAS, Limiting amino acid

Perfusion

A culture mode in which fresh medium is continuously supplied while spent medium is removed and cells are retained.

More on Perfusion

Perfusion supports very high cell densities and constant conditions but uses large medium volumes, so recycling matters. It is a common approach for cultivated meat intensification and for continuous bioprocessing. Cell retention devices such as filters or settlers keep cells in the reactor, and their fouling is a typical operational issue.

See also: Cell density, Cell culture medium, Bioreactor

Pesticide residues

Remaining traces of crop protection chemicals in ingredients, subject to maximum residue levels in food law.

More on Pesticide residues

Concentration steps can raise residues relative to raw material. Organic or controlled sourcing and testing reduce the risk, and glyphosate is often examined for oats and pulses used for protein ingredients. Maximum residue levels are set per crop, and processing factors are used to estimate residues in concentrated protein fractions.

See also: Heavy metals, Mycotoxins

Photobioreactor

An enclosed vessel or tube system that supplies light to cultures of microalgae or cyanobacteria under controlled conditions.

More on Photobioreactor

Closed systems limit contamination and evaporation compared with open ponds, but have higher capital cost. Light penetration, gas exchange and temperature control determine productivity and drive design of tubular, flat panel and column systems. Cooling and cleaning are frequent operational concerns, as biofilm on surfaces can reduce light transmission over time.

See also: Heterotrophic culture, Open pond, Spirulina

Phycocyanin

A blue pigment-protein complex from cyanobacteria such as spirulina, used as a natural food colourant and protein-rich fraction.

More on Phycocyanin

Phycocyanin is heat- and light-sensitive and degrades under acidic conditions, which limits its use in some products. Extracts have been permitted in various markets as colouring foods, and they contribute protein in addition to colour. Suppliers state colour value, often as an absorbance measurement, so the dosage required for a target shade can be calculated.

See also: Photobioreactor, Spirulina

Phytic acid

The main storage form of phosphorus in seeds, which binds minerals such as iron and zinc and reduces their absorption.

More on Phytic acid

Protein isolates made by wet extraction often carry phytate with the protein fraction. High levels can lower mineral bioavailability in finished foods. Phytase treatment, fermentation or washing steps can reduce it, which matters for products aimed at iron-sensitive consumers. Suppliers sometimes state phytate content on the specification sheet when the product targets mineral-sensitive consumers.

See also: Anti-nutritional factors, Wet extraction

Pilot plant

A small-scale production facility used to test processes and make trial quantities before commercial production.

More on Pilot plant

Pilot lines produce samples for customers, validate process parameters and gather data for dossiers. Access to open-access pilot facilities helps smaller developers avoid heavy upfront capital. Equipment is often flexible, which allows trials of several recipes, but throughput is low compared with commercial lines.

See also: Scale-up, CDMO

Plant cell culture

Growing plant cells in bioreactors to make food ingredients without farming the whole plant.

More on Plant cell culture

Cells taken from a plant are multiplied in liquid media and harvested as biomass. The approach is being explored for cocoa, coffee and berries, where climate pressure and long crop cycles limit supply. It differs from cultivated meat because the cells come from plants, and several foods made from plant cell cultures are already sold in the EU.

See also: Cell culture medium, Cell line, Biomass fermentation

Precautionary allergen labelling

Voluntary statements such as 'may contain' indicating possible unintended allergen presence from shared production.

More on Precautionary allergen labelling

PAL is not harmonised in the EU, and its use should follow a risk assessment of cross-contact rather than being applied by default. Plants handling several proteins need documented cleaning validation to justify or omit statements. Some retailers set their own rules, so brands supplying private label products may meet requirements beyond the legal minimum.

See also: Allergen labelling, Cross-contact

Precision fermentation

Use of engineered microbial hosts to produce a specific target protein, which is then purified from the culture and used as an ingredient.

More on Precision fermentation

Hosts such as yeast, filamentous fungi and bacteria are given the gene for a protein like beta-lactoglobulin or ovalbumin. The product is the purified molecule rather than the cells. Regulation, host residuals and cost per kilogram are the main commercial questions.

See also: Biomass fermentation, Downstream processing, Precision-fermented whey protein

Protein concentrate

A protein ingredient with a moderate protein content, typically in the range of 50 to 80 percent on a dry basis, retaining some non-protein constituents.

More on Protein concentrate

Concentrates are produced by dry fractionation or by removing soluble carbohydrates through washing. They usually cost less than isolates and keep more fibre and flavour compounds. The choice between concentrate and isolate depends on target functionality, label expectations and price.

See also: Protein isolate, Dry fractionation, Pea protein

Protein content (Nx factor)

The nitrogen-to-protein conversion factor applied to measured nitrogen, commonly 6.25, to calculate crude protein.

More on Protein content (Nx factor)

Using a single factor can overstate protein in materials rich in non-protein nitrogen, such as yeast, algae and insects with chitin. Specific factors are often proposed for these sources. Buyers should confirm which factor and which moisture basis a quoted protein figure uses.

See also: Dry basis, Black soldier fly protein, Spirulina

Protein digestibility

The fraction of ingested protein that is broken down and absorbed as amino acids and peptides.

More on Protein digestibility

Digestibility depends on the protein structure, processing, matrix and presence of inhibitors. In vitro methods using simulated gastric and intestinal digestion are used for screening, while animal or human studies provide reference values. It is a core input to quality scoring.

See also: True ileal digestibility, DIAAS

Protein efficiency ratio

Weight gain of a growing animal divided by the weight of protein consumed, used as a historical measure of protein quality.

More on Protein efficiency ratio

PER is derived from rat feeding trials and still appears in some regulatory frameworks, for example Canadian labelling rules. It does not reflect adult human requirements well and has been largely superseded by amino acid scoring methods, though legacy specifications may still cite it.

See also: Biological value, PDCAAS

Protein hydrolysate

A protein ingredient in which enzymes or acid have cleaved the chains into peptides, improving solubility and sometimes altering taste.

More on Protein hydrolysate

Hydrolysis raises solubility across pH and reduces viscosity, but it can introduce bitterness from hydrophobic peptides. The degree of hydrolysis is a specification parameter that determines function. Hydrolysates are used in beverages, infant-type formulations and as flavour precursors. Enzyme choice, time and temperature set the peptide profile, so hydrolysates from the same raw material can behave very differently.

See also: Degree of hydrolysis, Solubility

Protein isolate

A highly purified protein ingredient, typically above 85 to 90 percent protein on a dry basis, usually made by wet extraction.

More on Protein isolate

Isolates offer high solubility, neutral colour and consistent functionality, which makes them common in beverages and clean-label bars. The wet process uses water, acid or alkali and generates side streams. Yield, off-flavour carry-over and cost are the main trade-offs against concentrates.

See also: Protein concentrate, Wet extraction, Isoelectric precipitation

Q

QPS

Qualified Presumption of Safety, an EFSA status for microorganisms based on taxonomy, available for some groups used in food and feed.

More on QPS

Species with QPS status can skip some safety assessment steps for applications, subject to qualifications. For fermentation hosts, QPS status of the production organism simplifies the dossier, though it does not replace assessment of the final product. The list is reviewed regularly by EFSA, and species can be added, kept or removed according to new scientific evidence.

See also: EFSA, Novel food, Precision fermentation

R

Rennet

An enzyme preparation, mainly chymosin, that cleaves kappa-casein and causes milk to coagulate in cheesemaking.

More on Rennet

Rennet can be of animal origin or produced by fermentation. Fermentation-derived chymosin was among the first precision fermentation products widely used in food, with a long record of commercial use. Plant and microbial coagulants also exist, and each yields different cheese texture and flavour through its proteolytic side activity.

See also: Casein micelle, Precision fermentation

Rheology

The study of how materials deform and flow, used to characterise doughs, gels, melts and pastes of protein.

More on Rheology

Viscosity, storage modulus and yield stress inform extrusion settings, printing behaviour and mouthfeel of beverages. Rheometers measure these under controlled temperature and shear, and results guide formulation of both processing and sensory properties. Rheological testing during development helps explain why two protein batches with the same composition can process or feel different.

See also: Gelation, 3D printing

Rubisco

Ribulose bisphosphate carboxylase-oxygenase, the abundant leaf enzyme considered a promising source of highly functional plant protein.

More on Rubisco

Rubisco isolates show good gelling, foaming and emulsifying behaviour and a favourable amino acid profile. Extracting it from leaves such as duckweed or sugar beet requires removal of chlorophyll and phenolics, and novel food authorisation is needed in the EU. Protein purity and native structure are preserved only if extraction is gentle, which makes the process design more delicate than for seeds.

See also: Lemna, Gelation, RuBisCO protein

S

Saponins

Plant glycosides that foam in water and can contribute bitterness and astringency, found in quinoa, soy and pea.

More on Saponins

Saponin content varies by variety and is reduced by washing or abrasion, as with quinoa. In protein isolates, saponins may carry over and affect taste, though they also influence foaming behaviour in processing. Because of foaming, saponins can interfere with washing and drying steps and may need monitoring during extraction.

See also: Bitterness, Quinoa protein

Scaffold

A supporting structure on which anchorage-dependent cells attach, grow and organise into tissue-like formats.

More on Scaffold

Edible scaffolds can be made from plant proteins, polysaccharides or textured materials. They give structure for whole-cut products and must be food-safe, non-allergenic where possible, and compatible with cell attachment and nutrient diffusion. Porosity and stiffness influence how cells spread and align, which in turn affects the texture of the cultivated tissue.

See also: Adherent culture, Electrospinning, Cultivated meat

Scale-up

The transfer of a process from laboratory to pilot and then commercial scale while maintaining product quality and economics.

More on Scale-up

Mixing, oxygen transfer, heat removal and shear change with size, so results at small scale may not hold. Scale-up studies at pilot plants de-risk investment and generate material for sensory and application trials. Typical stages run from bench to pilot to demonstration plant, with each step producing data needed for the next investment decision.

See also: Pilot plant, Bioreactor, CDMO

Self-GRAS

An independent determination by a company and an expert panel that an ingredient is GRAS, made without notifying the FDA.

More on Self-GRAS

Self-GRAS conclusions can enable market entry but receive no agency review, and buyers may request additional documentation. FDA has proposed to make notification mandatory, so the status of self-affirmed claims is a diligence point in sourcing. Customers in regulated markets increasingly ask for the supporting panel report so they can verify the conclusion themselves.

See also: GRAS, GRAS notice

Sensory evaluation

Measuring how a food looks, smells, tastes and feels, using trained human panels, consumer tests and instruments that profile aroma, taste and texture.

More on Sensory evaluation

Trained panels score attributes on agreed scales, while consumer tests measure liking. Instruments such as electronic noses and tongues, gas chromatography-olfactometry and texture analysers add repeatable data and help screen many samples quickly. They support rather than replace human testing, because instrument readings do not fully predict how people perceive off-flavours or mouthfeel.

See also: Off-flavours, Beany flavour, Flavour precursors

Serum-free media

Culture media formulated without animal serum, using defined components or recombinant proteins instead.

More on Serum-free media

Serum-free formulations improve batch consistency, reduce contamination risk and remove animal inputs. Developing a cost-effective formulation that supports high density growth of food-relevant cells is a leading technical challenge. Formulations are often proprietary, so developers may disclose components to regulators under confidentiality in dossiers.

See also: Fetal bovine serum, Growth factors, Cell culture medium

SFA

The Singapore Food Agency, which regulates novel foods in Singapore and was first to approve cultivated meat for sale.

More on SFA

SFA operates a pre-market safety assessment framework for novel foods, covering production process, composition and toxicology. Approvals there have served as references for firms preparing dossiers elsewhere, though requirements differ by jurisdiction. Applicants submit safety data, and the agency may request additional information before it issues approval for a defined product.

See also: Novel food, FSANZ

Shear cell technology

A texturisation method applying controlled shear and heat between rotating cylinders to produce aligned fibrous protein structures.

More on Shear cell technology

The Couette cell concept was developed in the Netherlands and produces well-defined fibres from plant protein blends. It is mainly a research and pilot technology, with scale-up to continuous formats being the main challenge for commercial use. Researchers use it to study fibre formation mechanisms, and findings feed back into die design for industrial extruders.

See also: Texturisation, High-moisture extrusion

Shelf life

The period during which a product maintains its specified quality under defined storage conditions.

More on Shelf life

Protein powders are affected by moisture uptake, lipid oxidation and flavour change. Stability testing at accelerated and real-time conditions sets the date, and packaging barrier properties are part of the result. Many dry ingredients carry a stated period of twelve months or more, but the figure comes from stability studies on that exact product.

See also: Water activity, Hexanal

Side stream

A secondary material from a process, such as okara, pulp or spent grain, that can be valorised into food or feed.

More on Side stream

Valorising side streams improves resource efficiency, as in brewers' spent grain protein. Quality and food safety standards still apply, and they influence whether side streams qualify as food ingredients or remain feed. Collecting and stabilising wet side streams quickly is often the main logistical hurdle, because they spoil rapidly without treatment.

See also: Life cycle assessment, Brewers' spent grain protein

Solid-state fermentation

Fermentation on moist solid substrates with little free water, widely used for fungi such as koji and tempeh cultures.

More on Solid-state fermentation

The fungus grows through the substrate, producing enzymes and biomass. It uses less water than submerged culture and is suited to cereals and legumes, but heat removal and uniformity are engineering challenges at large scale. Operators monitor temperature and moisture within the bed, because gradients can lead to uneven growth and variable product quality.

See also: Traditional fermentation, Submerged fermentation, Koji protein

Solubility

The proportion of protein that dissolves in water under defined pH, ionic strength and temperature.

More on Solubility

Solubility, often measured as nitrogen solubility index, strongly influences use in beverages and emulsions and indicates denaturation during processing. Many plant isolates show a minimum near their isoelectric point, which affects clarity and sedimentation in acidic drinks. Reporting the pH, temperature and ionic conditions of the measurement is essential, since values change substantially under different test conditions.

See also: Isoelectric point, Denaturation, Nitrogen solubility index

Specification sheet

A document listing the agreed quality parameters and limits for an ingredient, including composition, microbiology and physical properties.

More on Specification sheet

A good specification names the analytical method for each parameter, the moisture basis and allergen status. It forms the contractual basis for supply, and changes should be agreed with buyers in writing. It differs from a technical data sheet, which gives typical values and application advice but is not contractually binding.

See also: CoA, Dry basis

Spray drying

Conversion of a liquid protein concentrate into powder by atomising it into a stream of hot air.

More on Spray drying

Inlet and outlet temperatures, solids content and atomiser type shape particle size, bulk density, solubility and denaturation. Spray drying is the standard finishing step for isolates, with agglomeration or lecithination added when better wettability is needed. Dried powders are then screened and packed, and moisture is typically controlled to a few percent to ensure storage stability.

See also: Denaturation, Solubility, Protein isolate

Submerged fermentation

Cultivation of microorganisms suspended in a liquid medium inside a stirred or aerated vessel.

More on Submerged fermentation

This is the dominant industrial format for yeast, bacteria and many fungal processes, giving good control of pH, temperature and oxygen. It underlies both biomass and precision fermentation and is operated in batch, fed-batch or continuous modes. Sterilisation of medium and equipment is necessary, and the harvest step typically involves centrifugation or filtration to separate cells or product.

See also: Bioreactor, Fed-batch, Solid-state fermentation

Substantial equivalence

A regulatory concept comparing a new food or process outcome with an existing counterpart to focus safety assessment on differences.

More on Substantial equivalence

Used in assessments of products from new processes, it does not mean no assessment is needed. Compositional, nutritional and toxicological comparisons establish where differences exist and what further data are required. For cultivated meat and fermentation products, equivalence is one part of a broader assessment of the process and product.

See also: Novel food, EFSA

Suspension culture

Cell growth freely dispersed in liquid medium without attachment, enabling stirred-tank bioreactor scale-up.

More on Suspension culture

Suspension is simpler to scale and harvest than adherent growth, so developers adapt lines to grow in suspension. Differentiation into tissue then requires later steps, such as aggregation or seeding onto scaffolds. Adaptation can take months and may change cell behaviour, so the resulting line is checked for stability and phenotype.

See also: Adherent culture, Bioreactor

System boundary

The limit that defines which life cycle stages are included in an LCA, such as cradle-to-gate or cradle-to-grave.

More on System boundary

Cradle-to-gate studies stop at the factory exit and omit consumer use and disposal. Boundary choice and treatment of by-products such as okara or frass affect results, so published figures must state them to be comparable. A wider boundary tends to include more stages, so results from cradle-to-gate and cradle-to-grave studies cannot be compared directly.

See also: Life cycle assessment, Functional unit

T

Technology transfer

The structured handover of a process and know-how from developer to a manufacturing partner or new site.

More on Technology transfer

Technology transfer documents critical process parameters, analytical methods and acceptance criteria. Clear intellectual property terms and comparability runs ensure the product made at the new site meets the original specification. The receiving site usually runs engineering batches first, and acceptance depends on matching key quality attributes of the original product.

See also: CDMO, Scale-up

Texturisation

Any process that gives protein a structured, chewy or fibrous texture resembling muscle meat.

More on Texturisation

Routes include extrusion, shear cell, spinning, freeze structuring and 3D printing. Each uses heat, shear or flow to orient protein molecules and create cross-links. Choice of route depends on target product, throughput and the protein's gelling behaviour. Sensory evaluation, such as texture profile analysis and trained panels, is used to judge how closely a result approaches real muscle.

See also: High-moisture extrusion, Shear cell technology, Wet spinning

Tolling

An arrangement in which a client supplies raw material and pays a facility to process it into a finished ingredient.

More on Tolling

Tolling allows brands to produce proteins such as textured or spray-dried ingredients without owning equipment. Contracts define yield guarantees, ownership of material and by-products, quality testing and confidentiality. Quality agreements specify who is responsible for incoming raw material checks, process deviations and release testing.

See also: CDMO, MOQ

Traditional fermentation

Food fermentation using established microbial cultures, as in tempeh, miso or yogurt, where microbes transform a substrate in place.

More on Traditional fermentation

Traditional fermentation modifies flavour, digestibility and anti-nutritional content of plant protein, and is used to reduce beany notes. Many such cultures have a long history of safe use, which can simplify regulatory status compared with new strains. Starter selection, time and temperature set the result, and fermentation can also change the colour and texture of the protein material.

See also: Biomass fermentation, Off-flavours, Fermented plant protein

Traditional food

In EU law, a food from a third country with at least 25 years of documented safe use, eligible for a simpler route.

More on Traditional food

The notification procedure lets others object on safety grounds, and if none succeed authorisation follows with fewer studies. It has been used for several plant and insect-derived ingredients from outside Europe. The pathway applies only to foods from third countries, so novel products invented in Europe cannot use it.

See also: Novel food, History of safe use

Transglutaminase

An enzyme that cross-links proteins through glutamine and lysine residues, strengthening gels and binding fibres.

More on Transglutaminase

Used to improve texture in analogues and dairy alternatives, it creates covalent bonds that resist heat. Enzyme source, dosage and declared labelling status vary between markets, and some formulators prefer cross-linking alternatives for clean-label products. It works on many proteins, though the extent of cross-linking depends on how accessible the lysine and glutamine residues are.

See also: Gelation, Texturisation

Tropomyosin

A muscle protein that is a major pan-allergen in crustaceans, mites and insects, associated with cross-reactive allergy.

More on Tropomyosin

Because tropomyosin is structurally conserved, people allergic to shellfish may react to insect-based foods. Regulators and labelling guidance for insect ingredients usually include a crustacean and mite cross-reactivity warning. The warning is a precaution derived from immunological similarity, and its wording follows national guidance and competent authority advice.

See also: Cross-reactivity, Allergen labelling, Mealworm protein

True ileal digestibility

The proportion of dietary amino acids absorbed by the end of the small intestine, corrected for endogenous losses.

More on True ileal digestibility

Ileal digestibility avoids the distortion caused by microbial fermentation in the large intestine, which affects faecal measurements. It is the digestibility basis for DIAAS. Data are often obtained in pigs or rats as models, and values differ by amino acid, processing history and anti-nutritional content.

See also: DIAAS, Anti-nutritional factors

Trypsin inhibitor

A protein in legumes, notably soy, that blocks the digestive enzyme trypsin and is largely inactivated by heat.

More on Trypsin inhibitor

Residual trypsin inhibitor activity is a common specification parameter for soy and other legume ingredients. Adequate thermal processing lowers it, but excessive heat can damage lysine and other amino acids, so processors balance inactivation against nutritional quality. Activity is typically reported in trypsin inhibitor units per milligram, and buyers can request the figure for each lot.

See also: Anti-nutritional factors, Soy protein

U

Ultrafiltration

A membrane process that retains proteins while letting water, salts and small molecules pass, used to concentrate and purify protein streams.

More on Ultrafiltration

Membrane cut-off, fouling and flux determine economics. Ultrafiltration captures soluble proteins that isoelectric precipitation misses and can remove anti-nutritional compounds with diafiltration. It is also used in downstream processing of fermentation products. Membrane type, pore size and operating pressure should be matched to the protein molecular weight and the feed viscosity.

See also: Diafiltration, Isoelectric precipitation, Downstream processing

W

Water activity

A measure of the free water available for microbial growth and chemical reactions, on a scale from 0 to 1.

More on Water activity

Dry protein powders have low water activity and are microbiologically stable, whereas hydrated analogues require chilling or preservation. It is a standard parameter for shelf life and food safety planning. Values below about 0.6 prevent growth of microorganisms, while higher values call for additional control measures such as chilling.

See also: Shelf life, Dry basis

Water holding capacity

The ability of a protein ingredient to retain water against force such as centrifugation or pressing.

More on Water holding capacity

Water holding affects juiciness, texture and yield in meat analogues and bakery. Fibre-rich concentrates tend to bind more water than isolates. Measurement conditions vary, so values should be compared only when determined by the same method. Processing such as heat treatment and particle size reduction changes how much water the protein can retain in a finished product.

See also: Oil binding, Gelation

Wet extraction

Aqueous extraction of protein from a milled raw material followed by separation and concentration, giving isolates of high purity.

More on Wet extraction

Typical steps are alkaline solubilisation, centrifugal removal of fibre and starch, and recovery of the protein by precipitation or membrane filtration. The method yields high protein content and neutral taste, but uses water and chemicals and produces side streams that need valorisation.

See also: Isoelectric precipitation, Ultrafiltration, Protein isolate

Wet spinning

A texturisation technique extruding a protein solution into a coagulation bath to form fibres that are then bundled into meat-like structures.

More on Wet spinning

Fibre diameter, coagulant and post-treatment control texture. The approach gives very fine fibres but involves binders, bath handling and relatively low throughput, so it is used in niche or premium analogue formats. Spun fibres are typically combined with binders and fat phases to build whole-cut analogues with a realistic structure.

See also: Texturisation, Electrospinning

Whey

The liquid fraction left after casein curd is removed from milk, containing proteins such as beta-lactoglobulin and alpha-lactalbumin.

More on Whey

Whey proteins are valued for solubility, gelation and amino acid profile. Animal-free analogues target the same functionality, which is why precision-fermented whey proteins aim for dairy-identical sequences and are labelled for milk allergen. Whey protein is sold as concentrate, isolate and hydrolysate, and alternative proteins are benchmarked against these grades in performance trials.

See also: Beta-lactoglobulin, Casein, Whey protein

Frequently asked questions

What is the difference between protein isolate and concentrate?

A protein concentrate is a partially purified protein that still contains some carbohydrate, fibre and fat. An isolate is purified further to give a higher protein share and a milder taste. The exact protein percentage depends on the raw material and the supplier's process.

What does DIAAS stand for?

DIAAS stands for Digestible Indispensable Amino Acid Score. It is the protein-quality measure recommended by FAO. It uses amino-acid digestibility at the end of the small intestine and compares each indispensable amino acid with a reference pattern, so the lowest ratio sets the score.

What is a texturised protein?

Texturized protein is protein that has been processed, usually by extrusion, so it forms fibrous, meat-like pieces when hydrated. Soy, pea and wheat proteins are common bases. Moisture, temperature and screw speed during extrusion strongly influence the final chewiness and structure.

What is precision fermentation?

Precision fermentation uses microorganisms, such as yeast or bacteria, that have been engineered to produce a specific protein, for example a milk or egg protein. The microbe is grown in a tank, the protein is purified, and the final ingredient is typically free of the production organism.

What does novel food mean?

In the EU, a novel food is a food or ingredient that was not consumed to a significant degree in the EU before the novel food rules took effect. It needs authorisation and listing before sale. Insects, some algae and fermentation-derived proteins have gone through this route.

What is the isoelectric point of a protein?

The isoelectric point is the pH at which a protein carries no net electrical charge. Near that pH, proteins usually have their lowest solubility because they attract each other and aggregate. Moving the pH away from it generally improves dispersion, which matters for beverages and emulsions.