What brewers’ spent grain protein is
Brewers’ spent grain protein is a plant protein recovered from the solid residue left after barley malt is mashed and the sweet wort is drawn off. Spent grain is produced in very large volumes year-round and is mostly sold as animal feed, composted or sent to biogas. Extracting its protein turns a low-value sidestream into a food ingredient.
Raw spent grain is not a high-protein material. A 2023 review summarises its composition as 15 to 30% protein, 50 to 80% fibre, 3 to 10% lipid, 1 to 12% starch and 2 to 5% ash, with polyphenols that can limit nutrient absorption. The task of extraction is to separate protein from a fibre-dominated matrix.
The protein itself is barley protein that has already been through malting and mashing. Prolamins (hordeins) make up about 35 to 55% of barley grain protein and glutelins 35 to 45%, with the rest albumins and globulins. Spent grain consists mainly of hordeins and glutelins, because the soluble albumin and globulin fractions largely wash into the wort.
Amino acid composition of brewers’ spent grain protein
Cereal proteins are normally short of lysine, and barley hordeins follow that pattern. The albumin fraction is the exception, carrying 4 to 7% lysine against about 2% in other fractions. Hordeins and glutelins, by contrast, are richer in sulphur-containing amino acids, with 4 to 9% methionine plus cysteine against about 2% in albumins.
Measured extracts show a useful compromise. One study reported lysine near 3% in extracted brewers’ spent grain protein, covering about 80% of the daily indispensable amino acid requirement per gram, and a combined methionine and cysteine content above that typical of pea or soy isolates. Pairing the extract with a lysine-rich legume protein closes the remaining gap.
No DIAAS or PDCAAS figure is available for extracted spent grain protein, so digestibility claims need care. Polyphenols and residual fibre can reduce protein availability in crude fractions, which is a reason the review favours isolating protein over simply adding spent grain flour to foods. A buyer should ask for in vitro digestibility data on the specific extract.
Extraction routes and their trade-offs
Alkaline extraction is the workhorse. Ground spent grain is suspended in dilute sodium hydroxide, often 0.1 M at around 60 °C for an hour, filtered to remove fibre, and acidified to the isoelectric point near pH 4 so the protein precipitates. One reported run delivered about 41% yield at 60% purity on a dry basis.
Purity is the persistent weakness. Across alkaline studies, protein purities of only 37 to 69% were obtained, which shows that efficient fractionation of protein from fibre is still needed. Defatting before extraction does not help much: one group saw yield fall from 45% to 38%, probably because protein dissolved in the methanol used for defatting.
Acid, reducing-agent and salt routes work differently. Sulphuric acid or sodium bisulfite breaks disulphide bonds and hydrolyses hemicellulose, lifting yields to about 63 to 90% but dropping purity to about 24 to 39%. Enzymatic and ultrasound-assisted routes are gentler, and give smaller, more soluble peptides at the cost of different functionality.
Functionality of brewers’ spent grain protein in formulation
Solubility depends almost entirely on the extraction route. Alkaline isolates are partly unfolded and often poorly soluble near neutral pH, because hordeins aggregate, while enzymatically hydrolysed extracts are far more soluble. That gap shapes every use, and it is why a single declared protein percentage says little about how a spent grain extract will behave in a drink.
Gelation is the most promising property. A 5% concentrate of 75% protein, extracted with alkali, formed a viscoelastic gel when glucono delta-lactone acidified the system to pH 4.2. A heat step of 72 °C for 20 minutes before acidification raised the storage modulus, yield stress and flow point, which suggests set-style plant-based desserts and binders.
Interfacial properties are weaker. Untreated extracts gave inferior emulsions, with droplets of 6 to 7 µm at pH 4, 7, 8 and 9, against a maximum of 2.5 µm for bovine serum albumin at pH 4. Ultrasound and proteolytic hydrolysis improve emulsifying and foaming, but extensive hydrolysis shortens the peptides and changes gelation, so processors must choose a target.
Colour, flavour and processing issues
Colour is the first complaint. Spent grain carries brown pigments and polyphenols, and alkaline extraction at high pH oxidises them further, so isolates are tan to brown. In extruded snacks, spent grain at 10 to 30% inclusion gives a darker, browner product, which suits wholegrain styles but limits pale applications such as dairy alternatives.
Inclusion limits for the unextracted material show why protein extraction matters. In semolina pasta, only 5 to 10% micronised spent grain could be added before sensory scores fell, and even fermentation with Lactobacillus plantarum could not hide the colour shift at 15%. A refined protein fraction lets formulators gain protein without the fibre load.
Flavour is cereal-like with a bitter edge that grows after enzymatic hydrolysis. Ethanol-based extractions leave highly aggregated hordein-rich protein, while hydrolysates release small peptides that taste bitter. Sourcing matters too, since a stream from a lager brewery differs from a dark-malt or wheat-beer stream, and a supplier should report the grist and mashing profile.
Applications and uses in food
Uses divide into two tiers. Raw or milled spent grain flour is already added to bread, pasta, crackers and extruded snacks to raise fibre and protein, accepting darker colour. Extracted protein goes further into meat alternatives, dairy-style beverages and bars, where its gelling and water-binding behaviour matter more than its solubility.
Hydrolysed fractions suit beverage bases and nutritional drinks better than whole protein. A 2022 notice in the United States for a barley and rice protein hydrolysate lists protein use at 0.5 to 90% in baked goods, beverages, breakfast cereals, dairy analogues, snack foods and soups, which indicates how broadly processors expect a cereal-derived protein to be used.
Blending is common practice for brewers’ spent grain protein. Combined with pea protein or rice protein, a barley-based extract lifts sulphur amino acids while the legume supplies lysine and function. Brands also use the upcycled origin as a sustainability story, which needs supporting documentation rather than assumption, because yields and energy use vary a great deal between processes.
Allergen and regulatory status
Barley is a cereal containing gluten, so any protein derived from it must be declared and cannot be sold as gluten-free without proof. Hordeins are the prolamins associated with coeliac disease, and an extract enriched in them concentrates the issue. This limits the ingredient for consumers who avoid gluten entirely.
In the United States, EverGrain’s barley and rice protein hydrolysate received a response in GRAS Notice No. 1031, with the FDA stating it had no questions on 20 October 2022. That notice covers a specific product, not every spent grain extract, so other manufacturers need their own determination or notice for a different process.
In the EU, food not consumed to a significant degree before 15 May 1997 requires novel food authorisation after EFSA assessment. Whether an extracted spent grain protein counts as novel depends on its process and composition, so suppliers usually seek a regulatory opinion early. Developers should request that opinion in writing and keep it with the product file.
How it compares with neighbouring proteins
Against other cereal-derived proteins, spent grain protein is lower in cost basis but higher in effort, because the starting material is wet, fibrous and perishable. It must be dried or processed quickly after brewing to avoid spoilage, and that logistics burden often decides whether a plant is built near a brewery or a protein is shipped as a dried flour.
Against pea protein and rice proteins, its main advantages are the sulphur amino acids and the sidestream origin. Its disadvantages are the lower typical purity, darker colour and gluten content. For most formulators, it is a complement to a primary protein rather than a straight replacement for pea or soy.