Skip to content
newprotein.net Explore ingredients
Menu
Almond blossom twig, shelled almonds, a pressed almond cake and fine pale almond protein powder on terracotta tiles

Plant proteins

Almond protein: extraction, functionality and uses in plant-based food

By the New Protein editorial team · Reviewed · 6 min read

Almond protein explained: amandin chemistry, press cake and isolate production, amino acid limits, solubility and foaming, tree nut allergen labelling.

Protein
35–94 %
Limiting amino acid
methionine + cysteine
Strong at
Solubility, Foaming
Diet
Vegan
Allergens
Tree nut
Group
Plant proteins

What almond protein is and how it is made

Almond protein is the protein fraction of Prunus dulcis kernels, available as a defatted press cake or flour, a nut butter powder, or a purified isolate. Kernels contain 18 to 25 percent protein on a dry weight basis. Most of it sits in protein bodies in the cotyledons beside oil bodies, which makes recovery harder than from soy or pea.

Oil removal comes first. Mechanical pressing of almonds at 73 to 80 °C produced a cake with 16.25 percent oil and 37.20 percent protein, and screw pressing removes 70 to 90 percent of the oil. Hexane removes more than 95 percent. A compositional review lists whole almonds at 19.7 g protein per 100 g and press cake at 35.8 g.

Wet routes then concentrate the protein. In the standard process, defatted almond flour is mixed with water at pH 9 to 11 using sodium hydroxide, insolubles are removed by centrifugation, and protein is precipitated near its isoelectric point. One isolate made this way reached 94 percent protein with a yield of 23 percent on a dry basis.

Almond protein extraction: methods and trade-offs

Conventional alkaline extraction is simple but wasteful. It recovers only about 40 to 50 percent of the protein in almond flour, produces large volumes of wastewater and can slightly denature the protein, which affects foaming and gelling. Aqueous and salt extraction are alternatives, but harsh conditions in all three reduce solubility and function.

Pretreatment changes the outcome. Blanching at 90 to 100 °C removes lectins and much of the phenolic fraction from the seed coat and gives a lighter kernel, but that temperature exceeds the roughly 80 to 85 °C denaturation range of related legumin proteins, so the protein entering extraction may already be partly unfolded. Defatting adds another trade-off.

Emerging methods target recovery without the same damage. Ultrasound at 200 to 600 W for 15 to 30 minutes disrupts the matrix, and sonication before Alcalase hydrolysis raised protein recovery by 116 percent, reaching a degree of hydrolysis of 10.95 percent after 50 minutes. Microwave, high-pressure and pulsed electric field treatments are also studied, but scale-up remains hard.

Nutrition and amino acid profile

Amandin dominates the composition. This legumin-type 11S globulin makes up about 80 percent of almond protein and 65 to 70 percent of the protein extracted from defatted meal. It is a hexamer of about 360 kDa built from acidic polypeptides of 42 to 46 kDa and basic polypeptides of 20 to 22 kDa, linked by disulphide bonds.

Because amandin is rich in nitrogen at about 19.3 percent, researchers prefer a conversion factor of 5.18 over the usual 6.25 for almonds. That choice shifts reported protein values, so comparing numbers across papers or specifications without checking the factor can mislead. Buyers should ask which factor underlies a stated protein percentage before comparing it with other ingredients.

Amino acid balance is good but not complete. Glutamic and aspartic acids are the two most abundant residues, and one analysis found sulphur-containing amino acids to be the first limiting group, with lysine and threonine limiting against stricter references. Reviewers call almond protein nutritious but unbalanced as a sole source and suggest pairing it with lysine-rich legumes.

Processing affects quality scores. Alkaline extraction and precipitation give isolates with favourable essential amino acid profiles, but PDCAAS values are diminished by phenolic cross-linking and residual trypsin inhibitory activity. Heat treatment also costs lysine: a protein quality review reports 73 percent reactive lysine in almond milk, against 94 to 99 percent in bovine and soy milk.

Almond protein functionality: solubility, foaming and gelling

Solubility is the headline property. Under alkaline extraction and precipitation, the isolate described in the review dissolved at 70 to 80 percent at both pH 4 and pH 7. That is a useful result for acidic and neutral products alike, but it depends on gentle handling, because harsher extraction conditions denature the protein and lower solubility.

Structure changes with pH. At pH 4 the isolate showed more random coil structure and formed a dense, continuous gel on heating, while at pH 7 it formed a particulate gel. Foam formation and stability improved, and emulsion activity indices rose at pH 4 to 4.5, which suggests that acidic products such as yoghurt alternatives and dressings are natural targets.

Oil bodies complicate matters. Co-extracted oleosin-stabilised oil bodies have low colloidal stability in the pH range used for precipitation, which makes phase separation harder, and the review stresses that functionality depends on protein structure, which in turn depends on pH and processing. Process choice therefore matters as much as the raw material when specifying an isolate.

Formulators should measure binding and stability at the use pH on their own lots. A practical test plan covers solubility at three pH values, foam half-life, gel firmness after heating at pH 4 and 7, and emulsion stability after a heat cycle, because each property shifts with the extraction route and the degree of denaturation involved.

Food applications and uses

Plant-based drinks are the largest use case. Almond beverages hold about 58 percent of the United States non-dairy milk market, yet many contain little protein because of low protein solubility and a high water-to-almond ratio. Better recovery could therefore feed beverages, yoghurt alternatives, desserts, spreads and fortified foods with a native almond protein fraction.

Defatted flour and nut butter powder are the forms most likely to be found today. A compositional review notes that press cakes from almonds and peanuts are often sold as nut butter powder. Almond cake holds about 35.8 g protein and 10 g fat per 100 g, against 50.5 g fat in whole almonds, a shift that suits protein fortification.

Competition comes from other seed proteins. Sunflower protein and sesame protein are press cake products with similar supply logic, while pea protein is the mainstream plant emulsifier and coconut protein is a tropical alternative. Almond protein earns its place through flavour and label appeal, not through price or amino acid completeness.

Regulatory and allergen status

Almond is a tree nut, and any almond protein ingredient falls under tree nut allergen rules. FDA lists tree nuts among the nine major food allergens and requires labels to name the specific nut, such as almond. In the European Union, Annex II of Regulation (EU) No 1169/2011 lists nuts, naming almonds first, and requires emphasis on the label.

Amandin is both the dominant storage protein and a major allergen, Pru du 6, which is thermally stable and can cause serious reactions. WHO/IUIS lists seven almond allergens in all: Pru du 1, 3, 4, 5, 6, 8 and 10. Controlled enzymatic treatment may reduce allergenicity in laboratory extracts, but removal is not guaranteed and labelling duties remain.

Facilities handling almond ingredients should plan for allergen control. Dedicated lines or validated cleaning, supplier audits for cross-contact and clear allergen statements on specifications help buyers who serve nut-free products. Almond protein should never be positioned as hypoallergenic, even where the review describes enzymatic or physical treatments that reduce allergenicity in laboratory extracts.

Sourcing and supply

Supply starts with almond processors and oil pressers. Almond cake is a by-product of oil extraction, and cake or flour is sold into food as a powder, while isolates come from specialist extractors. Buyers should request protein percent with the conversion factor, residual oil, particle size, blanching history, solubility at pH 4 and 7, and a statement of allergen controls.

Cost drivers include kernel price, oil value, extraction yield and wastewater handling. With conventional alkaline extraction recovering 40 to 50 percent of the protein and one reported isolate yield of 23 percent, isolates cost more per kilogram of protein than press cake, which brings residual fat, fibre and almond flavour with it.

Overall, the ingredient suits formulations where nut identity is a selling point and the label can carry the allergen declaration. Its solubility and foaming strengths are real, but its sulphur amino acid limit, allergen status and extraction cost shape where it competes, and blends with legume proteins close the amino acid gap.

Frequently asked questions

How much protein do almonds contain?

Almond kernels contain about 18 to 25 percent protein on a dry weight basis. Mechanically pressed almond cake reached 37.20 percent protein with 16.25 percent residual oil in one study, and alkaline-extracted isolates have been measured at about 94 percent.

What is amandin?

Amandin is the main almond storage protein, a legumin-type 11S globulin that accounts for about 80 percent of almond protein and 65 to 70 percent of extractable protein. It is a hexamer of roughly 360 kDa and is also the allergen Pru du 6.

Is almond protein a complete protein?

Almond protein supplies all essential amino acids, but sulphur-containing amino acids are the first limiting group, and lysine and threonine become limiting against stricter reference patterns. Reviews suggest supplementing with lysine-rich legumes for a better balance.

Why do almond drinks contain so little protein?

Almond protein is hard to solubilise, and almond beverages are made with a high water-to-almond ratio. Many commercial almond drinks therefore contain far less protein than dairy or soy milk, which motivates work on better protein recovery.

Is almond protein an allergen?

Yes. Almond is a tree nut, a major allergen in the United States and listed under nuts in EU allergen law. Amandin is thermally stable, so heating does not remove the risk, and labels must name almond.

What is the best way to extract almond protein?

Alkaline extraction with isoelectric precipitation is the standard route but recovers only 40 to 50 percent of available protein and can denature it. Ultrasound and enzyme-assisted methods improve recovery and functionality, though scale-up remains a challenge.