What sesame protein is and how it is made
Sesame protein is recovered from Sesamum indicum seeds, usually from the defatted cake left after oil pressing. Whole sesame seeds hold about 22.4 g protein per 100 g, but press cake concentrates it to roughly 41 to 45 g as fat falls from 41.2 g to 4.0 g. That makes the cake a natural starting point for flours and isolates.
Defatting comes first. In one study, raw sesame meal containing 27.3 percent protein was defatted with hexane to reach 42.63 percent, then extracted at pH 11 with sodium hydroxide for one hour at 50 °C, centrifuged and precipitated near pH 4.2. Fat dropped from 16.2 percent in the raw meal to 2.33 percent in the isolate.
An alternative route uses salt. Researchers optimised extraction of defatted seeds with 0.6 M salt at pH 7, precipitated the protein at its isoelectric point of about pH 4, washed it, and neutralised it to pH 7. The resulting isolate contained 88.98 percent protein, and its hydrodynamic particle diameter was 0.33 µm, smaller than the 3.02 µm of defatted seeds.
Sesame protein nutrition and amino acid profile
On nutrition, the standout feature is sulphur amino acids. The isolate contained 2.78 g methionine and 1.57 g cysteine per 100 g, a total of 4.35 g, which the authors call rare among plant proteins. Brazil nut, peanut and sesame press cakes were the only ones in a review to exceed both whey and soy methionine benchmarks.
Lysine is the weak point. The same isolate held 2.82 g lysine per 100 g, lower than in other isolates, while arginine reached 11.86 g and glutamic acid 17.78 g. Leucine measured 5.68 g, phenylalanine 4.47 g, threonine 3.45 g and valine 3.52 g. Buyers should read these figures as one isolate, not as a universal specification.
Complementation is the obvious fix. Legume proteins supply lysine and sesame supplies methionine, so blends can close both gaps, and the same logic applies to cereals that are short on lysine but strong in sulphur amino acids. A mix of sesame with a pulse isolate is therefore a better nutrition story than sesame protein alone.
Anti-nutrients are present but manageable. Phytates, which can reduce absorption of minerals such as iron and zinc, were reported in press cakes from almonds, peanuts, sesame and sunflower seeds, and polyphenolic compounds occur as well. The review judged these mostly manageable through typical food processing, so supplier specifications should cover phytate level alongside protein and fat.
Functionality: solubility, emulsifying and foaming
Solubility is the main limit. The isolate showed a U-shaped solubility profile with a minimum at pH 4 to 5, near its isoelectric point, and rose to 41.11 percent at pH 2 and 36.99 percent at pH 3. At neutral pH it dissolved only 10.28 percent, which rules out clear protein beverages and suits opaque, emulsified products.
Emulsifying behaviour is respectable. The isolate showed an emulsion capacity of 51.32 percent, emulsion stability of 49.50 percent, an emulsion activity index of 12.86 m²/g and an emulsion stability index of 44.96 minutes. Earlier work cited by the authors found sesame isolate emulsifying properties and solubility comparable enough to consider replacing soy isolate in some products.
Binding and foaming are weaker. Water holding capacity was 1.26 g/g and oil holding capacity 3.40 g/g, with oil binding exceeding water binding probably because solubility was low at neutral pH. Foaming capacity was 36.21 percent with 22.79 percent stability after 10 minutes, with excess globular protein cited as a reason.
Compared with soy, the picture is mixed. Published work reports lower water and oil holding capacities for sesame isolates than for soy isolates, and notes that foaming and emulsifying properties of sesame protein depend on pH. Isoelectric precipitation makes isolates and concentrates easy to obtain, which helps explain why sesame protein has become a popular commercial protein despite these limits.
Flavour, colour and processing issues
Processing choices show up in colour and function. The zeta potential of the isolate moved from positive at low pH to negative at high pH and was neutral at pH 4 to 5, the same window where solubility is lowest. Operating away from that window keeps particles charged and stable, which matters for beverages and sauces.
Raw material form matters too. Sesame press cakes are sold as flour, and one review notes that cakes may contain residual anti-nutritional compounds, and that their sensory properties, including taste, texture and solubility, may limit consumer acceptance in sports nutrition. For food technologists, that means testing cake, defatted flour and isolate side by side before committing to a grade.
Extraction chemistry should be recorded. Alkaline extraction at pH 11 and 50 °C, salt extraction at pH 7 with 0.6 M salt and acid precipitation at pH 4 to 4.2 all give different isolates, and a hydrolysate study shows that fermentation of the isolate can produce peptides with antioxidant activity, though that route is a separate product.
Applications and sesame protein uses
Documented sesame protein uses centre on flours, press cake powders and isolates in emulsified and baked products. The 2023 isolate study concluded that sesame protein could be used as a functional component in foods, with research needed on specific food systems. Sudan, India and Myanmar are named as producing countries for the sesame flour sold as a press cake ingredient.
Sesame sits among press cake proteins. Sunflower protein and pumpkin seed protein share similar supply logic, flaxseed protein and hemp protein target the same seed-protein buyers, and almond protein competes where nut or seed identity is a feature. In one review, sesame cake had the highest protein among the seed press cakes, at 44.5 g per 100 g.
For formulators, the practical pairing is with lysine-rich proteins. Sesame contributes methionine and cysteine, which many legume proteins lack, while a pea, faba or lentil isolate contributes lysine. In emulsified sauces the isolate’s emulsion capacity of about 51 percent is workable, but beverages and foams need other proteins or modified grades.
Allergen status and regulation
Allergen labelling is the defining regulatory issue. Sesame seeds and products thereof are named in Annex II of Regulation (EU) No 1169/2011, and the allergen must be emphasised in the ingredient list. In the United States, the FASTER Act made sesame the ninth major food allergen, effective on 1 January 2023, so labels must declare it.
Allergen control extends to the plant. A review of plant proteins notes that sesame seeds are a common food allergen in Canada, the European Union and Australia and New Zealand, and that as plant protein consumption grows, so will allergic responses to new sources. Buyers serving allergen-free ranges should audit suppliers for cross-contact and require validated cleaning.
No special novel-food status has been identified in the sources used here, and the regulatory position of any sesame protein ingredient depends on its process and identity. Suppliers should provide specifications covering protein, fat, moisture, phytate, microbiology and contaminants, and a declaration that sesame is present, so that downstream manufacturers can complete allergen statements correctly.
Sourcing and supply of sesame protein
Supply starts with sesame crushers in producing regions, where the press cake is a by-product of oil extraction. Buyers should specify protein on a dry basis, the nitrogen factor, residual fat, phytate, particle size and the extraction route, since protein ranges from about 41 percent in cake to roughly 89 percent in isolate.
A practical test plan covers solubility at pH 3, 5 and 7, emulsion capacity and stability at the target oil level, foam stability after 10 minutes, and water and oil holding capacity. Given the 10.28 percent solubility at neutral pH reported for one isolate, any beverage trial should start with a modified or hydrolysed grade, not a native isolate.
Overall, sesame protein is a niche, methionine-rich ingredient whose value lies in amino acid complementation and moderate emulsifying performance. Its limits are low solubility at neutral pH, weak foaming, a lysine gap and mandatory allergen labelling. Used in blends and in products where sesame identity is acceptable, it adds a useful sulphur amino acid contribution.