Skip to content
newprotein.net Explore ingredients
Menu
Pea protein paste turning creamy under fermentation with koji-like bloom in bamboo trays, steam and warm basement light

Fermentation-derived proteins

Fermented plant protein: flavour, digestibility and uses

By the New Protein editorial team · Reviewed · 6 min read

Fermented plant protein explained: bacterial, yeast and fungal routes, off-flavour reduction in pea protein, digestibility effects and regulatory points.

Protein
13.9–86.5 %
Diet
Vegan
Allergens
Soy, Gluten, Lupin
Group
Fermentation-derived proteins

What fermented plant protein is

Fermented plant protein is a protein ingredient or food in which microorganisms have been allowed to act on a plant substrate, such as pea, soy, lupin or potato pulp. The microbes may be lactic acid bacteria, yeasts or filamentous fungi. They consume sugars, produce acids, esters and enzymes, and change the flavour and sometimes the nutritional quality of the protein.

The category has two ends. At one end are traditional foods made by solid-state fermentation, which an Annual Review article describes as including the mould- and Bacillus-fermented foods tempeh, sufu and natto. At the other are modern ingredients in which a commercial isolate is suspended in water, fermented for a day or two and then dried.

Fermentation here is a modification step, not a way of making the protein. That separates fermented plant protein from mycoprotein, where the fungal biomass is the product, and from precision fermentation, where a host secretes one recombinant protein. A pea isolate fermented with yeast is still a pea ingredient, with a changed volatile and acid profile.

Developers turn to fermentation for three reasons: to tame off-notes in legume proteins, to improve protein quality, and to create new savoury taste. Each aim calls for a different organism and a different process, so the phrase covers a wide family of ingredients, from lightly acidified isolates to nutritionally restructured mycelium-on-substrate products.

Fermented plant protein flavour and off-note reduction

Pea isolates carry beany, green and cereal notes, caused by volatile aldehydes, ketones and furans. In a study at lab scale, a commercial pea protein isolate with 86.5 % protein was made up as a 5 % suspension with 1 % glucose, sterilised and fermented at 30 °C for 24 hours with bacteria or 48 hours with yeasts and mixed cultures.

The outcome depended on the organism. Lactococcus lactis acidified the suspension from pH 6.5 to 4.6 in 24 hours, but hexanal rose from 615.9 to 924.9 µg/L, a rise of about 50 %. Yarrowia lipolytica alone dropped hexanal to 1.9 µg/L, below its odour threshold of 5 µg/L, while Kluyveromyces strains reached 5.7 to 5.8 µg/L.

Mixed cultures sat in between. Combining K. marxianus with L. lactis left hexanal at 17.1 µg/L, Y. lipolytica with L. lactis at 63.8 µg/L and K. lactis with L. lactis at 89.4 µg/L, with the pH falling to about 4.3 after 48 hours. The pairing delivered acidification and flavour change together, which a single strain did not.

Sensory results show that removal and masking differ. The control was described as cereal-like, green, soy drink-like and beany. Yarrowia alone stayed green and beany, the Yarrowia and Lactococcus mix read yeasty and slightly cereal-like, and Kluyveromyces samples read fruity, malty or alcoholic because of esters such as ethyl hexanoate. Reducing hexanal therefore does not guarantee a neutral product.

Digestibility, nutrition and antinutritional factors

The strongest nutritional argument concerns solid-state fermentation. The 2024 Annual Review article states that tempeh-type fermentations improve the protein digestibility of the plant material, remove antinutritional factors and produce additional essential amino acids, while creating distinctive textures and flavours. It also links these processes to kokumi and umami taste sensations, which matter for savoury products.

A 2026 narrative review on culinary fungi reaches a similar conclusion for cereals, legumes and oilseed meals: solid-state fermentation consistently raises protein concentration and quality, improves nutrient bioavailability and reduces antinutritional factors. It adds that outcomes can be tuned through moisture, temperature, particle size, aeration, residence time and a final heat treatment, so one fungus can give different products.

Submerged fermentation of an isolate is a different case. The pea study measured volatiles and sensory profile, not digestibility, solubility or emulsifying properties, so it cannot support claims on those points. A developer who wants a digestibility claim should run in vitro digestion on the actual ingredient and compare it with the unfermented control.

Mycelium on a side stream shows how protein itself can change. When Flammulina velutipes was grown submerged on potato pulp, the protein content rose from 5.3 to 13.9 g per 100 g dry matter, with a biological value of 86. Enzymatic hydrolysis then reached a degree of hydrolysis of 75.1 % and raised free glutamate more than twentyfold, which gave umami.

Process routes for fermented plant protein

Submerged fermentation treats the protein as a suspension. The isolate is dispersed in water with a little sugar, heat treated, inoculated and held at around 30 °C, then inactivated and dried. It runs in ordinary tanks with existing isolates, but it works on proteins that are already refined, so it adds a step to a processed ingredient.

Solid-state fermentation uses moist solid substrate and grows the organism through it. Tempeh and natto are the classic examples, and fungal solid-state routes now extend to oilseed meals and cereal by-products. The review literature describes it as a way to raise protein concentration and valorise side streams, with the fungus growing through the substrate.

Mycelium grown on side streams sits between the two. The potato pulp study produced a fungal-rich product, estimated at 83 % fungal content, that was then hydrolysed with a peptidase to boost taste. The route turns a low-protein by-product into a savoury ingredient, though 13.9 g protein per 100 g dry matter makes it a flavour booster, not a bulk protein.

Process control decides reproducibility. Temperature, pH trajectory, oxygen supply, inoculum and sterilisation of the substrate all alter the metabolite profile. The pea study autoclaved the suspension before inoculation to remove native microbes, and it noted that Y. lipolytica must be heat inactivated before use in food, because it is not yet fully authorised as a viable food culture.

Regulatory and allergen points

Traditional fermented soy and legume foods have a long record in Asia and Africa, which the Annual Review article documents, and they are generally treated as established foods. New cultures or substrates are different. A strain without food history may need a novel food assessment in the European Union, or a GRAS conclusion in the United States, before use.

Allergen status follows the substrate. A fermented soy product is still soy, a fermented wheat product still contains gluten, and a fermented lupin product still carries the lupin allergen. Labels should therefore reflect the starting material, and any proposal to drop an allergen declaration needs its own dossier and supporting analytical evidence.

Claims need discipline. A statement that a product is more digestible, lower in antinutrients or free of beany taste should rest on measurements on that product, not on the literature for another substrate. Volatile data, such as hexanal in micrograms per litre, give objective evidence for flavour claims, while sensory panels confirm that the remaining profile is acceptable to consumers.

Documentation matters for buyers too. Specifications should name the substrate, the organism and strain, the fermentation time and temperature, the final pH, the inactivation step and the residual viability. Without them, two products labelled as fermented pea protein can differ widely in taste, acidity and functional behaviour, and a supplier change can alter a finished recipe.

Sourcing and comparison with unfermented and fungal proteins

Suppliers fall into three groups: tempeh and natto makers who sell finished foods or ingredients, ingredient houses that ferment commercial isolates, and mycelium companies that grow fungi on grain or side streams. When comparing offers, check whether the protein is the original plant protein or fungal biomass, because functionality and labelling differ between those two cases.

Against unfermented pea protein, a fermented isolate offers a changed flavour and acid profile, and possibly different functionality, but it adds a processing step and needs its own data on use. Textured products can use either: textured pea protein is extruded from the isolate, and a fermentation step can be placed before drying to modify the taste.

Other fungal routes are covered separately. Koji protein uses Aspergillus biomass as the protein, yeast protein comes from the yeast cell itself, and mushroom root products are mycelium-based. In each case the microbe is the ingredient, while in fermented plant protein the microbe is a processing aid that leaves its metabolites behind.

For most developers the practical test is simple. Run the unfermented control and the fermented sample through the same matrix, measure hexanal or an equivalent marker, run a sensory panel, and compare solubility and gel strength at the pH and salt level of the product. Fermentation helps only where the measured gain survives the cost of the extra step.

Frequently asked questions

What is fermented plant protein?

It is a plant protein that has been treated with bacteria, yeast or fungi, either as a finished food such as tempeh or as an ingredient such as a fermented pea protein isolate. The aim is usually flavour, texture or nutrition.

Does fermentation remove the beany taste of pea protein?

Not always. In one study, a lactic acid bacterium raised hexanal by about 50 %, while Yarrowia lipolytica cut it from 615.9 to 1.9 µg/L. The organism and the pairing decide the outcome.

Does fermentation improve protein digestibility?

A 2024 review reports that solid-state fermentations with moulds and Bacillus, such as tempeh and natto, improve digestibility and remove antinutritional factors. Results depend on the substrate, strain and process, so each product needs its own data.

Which fermentation methods are used?

Submerged fermentation of a protein suspension, solid-state fermentation of a moist substrate with fungi, and mycelium grown on side streams are the main routes. Each gives a different texture, flavour and cost.

Is fermented plant protein allergen-free?

No. The substrate keeps its allergens, so fermented soy remains soy and fermented wheat remains wheat. Labelling follows the source material unless a dossier shows otherwise.

Is it the same as mycoprotein or precision fermentation?

No. Here the plant protein is the substrate and the microbes modify it. Mycoprotein is the fungal biomass itself, and precision fermentation makes a single recombinant protein in a host.