Skip to content
newprotein.net Explore ingredients
Menu
Low-angle view of a long cooling die releasing a fibrous plant-protein slab torn open to show aligned fibres

Supplier profile · France

Clextral: twin-screw extrusion lines for proteins

Clextral, based in Firminy, France, builds twin-screw extrusion lines for textured vegetable protein, high moisture meat analogues, snacks and pet food.

By the New Protein editorial team · Reviewed

Ingredients from Clextral

IngredientSource groupProteinStrong at
Textured vegetable protein Plant proteins 51.5–75.2 % Water binding
Textured pea protein Plant proteins 80 % Water binding

What Clextral builds

Clextral is a French equipment maker from Firminy that designs twin-screw extruders and complete extrusion lines. Its history page dates the company to 1956, when it acquired a licence for co-rotating twin-screw extruders, and lists later steps in crispbread, pulping, couscous and pasta lines. Today the food catalogue spans alternative proteins, cereals, snacks, crispbreads, ingredients and pasta.

The company says it pioneered twin-screw extrusion for plant-based proteins and has over 30 years of experience with textured vegetable proteins, meat substitutes and protein powders. It sells to manufacturers, not to consumers, so the relevant product for a developer is the line itself, together with process knowledge on screw profiles, dies, cutters and downstream drying.

Clextral also serves feed, pet food, aquatic feed and non-food uses such as banknote paper and bioplastics. That range gives it a broad base of materials experience. For protein developers the question is how much of this knowledge transfers to a given raw material, which is why pilot trials matter more than references from other industries.

High moisture extrusion

High moisture extrusion is the route to fibrous, whole-muscle-style analogues. The company describes twin-screw lines that mix, cook and transform protein ingredients under high moisture conditions, followed by a long cooling die that optimises texturisation and shaping. It states that the flexible extruder can process a wide range of plant proteins into analogues with chicken, pork, beef and seafood textures.

The cooling die is where fibre alignment is set. Protein melts in the barrel, and as the melt passes through a cooled channel, shear and temperature gradients align the molecules into layers. Die length, coolant temperature and the pea, soy or fava protein used all change tenderness and fibre size. Developers often compare several isolates on one line first.

Raw material choice affects every setting. Isolates with high solubility behave differently from concentrates with more starch and fibre, and moisture content, pH and mineral levels shift the melt viscosity. Information on typical inputs is in the entries on textured pea protein and textured vegetable protein. Clextral supplies the equipment, and the recipe remains the customer’s job.

Dry texturised protein and hybrid lines

For dry textured vegetable protein, the company says its twin-screw lines allow efficient and cost-effective production from many raw materials, with dies and cutters designed to give various shapes. Dry extrudates are expanded and dried to low moisture, then rehydrated by the end user. They suit minced applications, blends and hybrid products.

Lines are offered from research scale to large production capacity. The company also lists hybrid extrusion lines designed for research and development, which can process both dry textured proteins and high moisture products. For a company still choosing between formats, one flexible research line can reduce the investment needed to test both routes with the same raw materials.

Drying is a large part of dry texturisation. The company launched a new dryer in 2019, described in its history as a versatile system for all requirements, with high performance and eco-design. A buyer planning a dry line should include the dryer, cooling and cutting stages in the budget, since each influences bulk density, rehydration ratio and final moisture.

Pilot plant, training and service

The alternative proteins page cites a Clextral Tampa pilot plant, and the company lists brochures on its Evolum+ extruders. Evolum+ is the extruder range launched in 2014, described as smart in operation and clean in design. A pilot plant lets a customer test a raw material under real screw and die conditions before committing to a full-size line.

The company also runs a training programme called Clextral Learn, with a first module on the basics of extrusion and the extruder. Training matters because line performance depends on operators who understand screw configuration, barrel temperature profile and die pressure. Ask whether operator training is included in a purchase and whether further modules are available for process engineers.

International presence is listed by date, beginning with France in 1956 and the United States in 1983, followed by China, Chile, Algeria, Scandinavia, the Pacific, Vietnam, Brazil, India and Southeast Asia. A buyer outside France should ask which local team handles installation, spare parts and service, and what response time is guaranteed for a production line that runs continuously.

How a buyer would evaluate the supplier

Begin by defining the product format: fibrated high moisture cuts, dry minced texturate, or both. Provide the supplier with your raw material, target moisture, throughput and desired texture, then ask for a trial plan and a written report. Compare dies, cooling lengths and screw profiles proposed, and ask what scale-up factor applies between the pilot line and the production line.

Ask for performance data in concrete terms: throughput per hour, specific mechanical energy, cooling water demand, die cleaning time and the expected yield loss at start-up. Request references from customers running similar proteins, and ask to visit a plant in operation. The website lists categories and brochures but no figures, so these numbers will come through a quotation.

Finally, consider downstream steps and total cost of ownership. High moisture products often need cutting, marinating, cooking and chilled storage, while dry texturates need drying and packing. Spare parts, screw wear, energy and operator training add to cost. Contact details for the Firminy head office and customer support line are on the website.

Frequently asked questions

What does Clextral sell?

Clextral builds twin-screw extruders and complete extrusion lines for food, feed and non-food uses. For proteins it supplies high moisture extrusion lines, dry texturised vegetable protein lines and hybrid lines for research.

Can the lines make meat analogues?

Yes. The company says its high moisture lines mix, cook and texturise protein with a long cooling die, producing fibrated products with textures of chicken, pork, beef and seafood.

Does Clextral offer trials before purchase?

The alternative proteins page refers to a Clextral Tampa pilot plant and to R&D hybrid lines meant for development work. Buyers should ask for trial conditions and the data they receive.

Is it a new company in extrusion?

No. The company history page dates its activity to 1956, when it licensed co-rotating twin-screw extruder technology, and says it has worked with textured vegetable proteins for over 30 years.